Bushwick Mold Testing and Mold Inspection
Bushwick began as the Dutch settlement of Boswijck, and for generations its breweries made it known as the “beer capital of the Northeast” until the last one closed in 1976. The following year, during the 1977 blackout, arson and looting heavily damaged the Broadway shopping district, and fires spread to residential buildings. Since then the neighborhood has rebuilt and changed again. Today Bushwick’s housing includes six-family apartment buildings, two- and three-family townhouses, brownstones, and converted warehouse lofts, with busy commercial streets along Knickerbocker, Myrtle, and Wyckoff Avenues and Broadway. The 2020 Census counted 120,741 residents, according to figures reported for the neighborhood.
Prime Environmental NY provides independent mold testing in Bushwick, Brooklyn and professional mold inspection for renters, homeowners, landlords, artists and studio tenants, and businesses. We inspect, sample, and report. We do not perform mold remediation or removal.
Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule mold testing in Bushwick.
Bushwick at a Glance
- Community district: Brooklyn Community District 4
- ZIP codes: 11206, 11207, 11221, and 11237
- Neighbors: Ridgewood, Queens, to the northeast; Williamsburg to the northwest; the Highland Park cemeteries to the southeast; and Bedford–Stuyvesant to the south and southwest
- Commercial streets: Knickerbocker Avenue, Myrtle Avenue, Wyckoff Avenue, and Broadway
Six-Family Buildings and Townhouses
Bushwick’s six-family apartment buildings and two- and three-family townhouses are typically a century old or more. Common moisture patterns in these buildings include:
- Stacked bathrooms and kitchens where leaks travel from one apartment to the one below
- Flat roofs and parapets that leak into top-floor units after storms
- Masonry walls where eroded mortar or failed window sealant lets wind-driven rain in
- Cellars with older foundations that admit moisture after heavy rain
- Radiator heat and closed windows that raise winter humidity and condensation on cold walls
Our professional mold inspection documents conditions in your apartment and notes when moisture appears to come from another unit, the roof, or a building system.
Converted Warehouse Lofts and Studios
Bushwick’s former industrial buildings now house apartments, artist studios, rehearsal spaces, and creative businesses. These buildings were not designed for residential use, and common moisture questions include:
- Old flat roofs and roof drains over large floor plates
- Large window openings with aging frames and seals
- Bathrooms and kitchens added during conversion, sometimes with limited ventilation
- Ground-floor and below-grade spaces with a history of water intrusion
- Stored materials, artwork, and equipment that can be damaged by humidity
We pay close attention to ceilings below roofs, perimeter walls and windows, and any wet areas added during the conversion.
Mold Testing Services
Professional Mold Inspection
A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.
Moisture Investigation
Moisture readings and observations focused on plumbing leaks, roof leaks, flooding, condensation, humidity, and water intrusion.
Mold Air Sampling and Mold Spore Testing
Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.
Mold Surface Sampling
Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is how black mold testing gets a definitive answer.
Indoor Air Quality Testing
Mold-focused indoor air quality testing that pairs air sampling with inspection findings.
Post-Remediation Mold Verification
After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.
Commercial Mold Inspection in Bushwick
Restaurants, bars, cafés, bakeries, groceries, shops, studios, and event spaces along Knickerbocker, Myrtle, and Wyckoff Avenues and Broadway often occupy older buildings with cellars, kitchens, and storage rooms where moisture collects. Our commercial mold inspection defines the areas to evaluate, documents conditions, and explains every sample location.
Tenants, Landlords, and Local Law 55
Many Bushwick residents rent their homes. New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other. Tenants should notify their landlord and can call 311 if the problem is not addressed.
NYS Licensed Mold Assessment
Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:
- Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
- Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)
Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.
Protecting Artwork, Instruments, and Equipment
Creative work spaces store materials that are especially vulnerable to humidity: canvas, paper, wood, fabric, and electronics. In studios and lofts:
- Keep stored work and materials off the floor and away from exterior walls.
- Use sealed containers for paper and textiles.
- Monitor humidity; the U.S. Environmental Protection Agency recommends keeping indoor humidity below 60 percent, ideally 30 to 50 percent.
- Check ceilings below roof drains and skylights after storms.
- Report leaks to the building owner promptly and document them with photos.
Condensation or Leak?
Many Bushwick tenants first notice mold in winter, along window frames, in exterior corners, or inside closets. Two very different causes can produce similar-looking growth:
- Condensation forms when warm, humid indoor air meets cold surfaces. It tends to appear in a band near windows and exterior corners, worsens in the coldest months, and improves in summer. Better ventilation, humidity control, and air circulation are the usual fixes.
- Leaks usually follow a path, often show tide-line staining, appear after rain or after a neighbor uses water, and may be accompanied by bubbling paint or soft plaster. They need a building repair.
Moisture readings taken during the inspection, along with the pattern and timing of the staining, help tell the difference. That answer matters, because it determines whether the next step is a change in household habits or a call to the landlord, roofer, or plumber.
What Your Findings Include
When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps.
How the Inspection Works
We start with a phone call about your concerns and which areas to include. On site, we review the space’s history with you, inspect, take moisture readings, photograph conditions, and collect samples according to the scope. Samples go to a laboratory, with turnaround based on the service level selected. When a written report is part of your service, it includes laboratory results, interpretation, observed conditions, and recommendations.
Preparing for Your Visit
- Leave suspect areas uncleaned and unpainted.
- Keep windows closed as usual before air sampling, and switch off air purifiers shortly before the visit.
- Clear access to closets, under-sink cabinets, and windows.
- Gather dates of leaks, repair visits, and messages to your landlord.
Signs Worth a Professional Look
- A musty smell in a closet, bathroom, or bedroom
- Ceiling stains below bathrooms or on the top floor after rain
- Bubbling paint or crumbling plaster near windows
- Spotting in exterior corners or behind furniture in winter
- Damp, stained, or musty-smelling stored items
Bushwick Mold Testing FAQ
Can I hire you as a tenant?
Yes. You can hire us to inspect and test the areas you can provide access to.
Do you inspect lofts and studios?
Yes. We inspect converted lofts, studios, and commercial spaces as well as apartments and townhouses.
Do you remove mold?
No. We provide independent inspection and testing only.
Do you serve Ridgewood and Williamsburg?
Yes, along with Bedford–Stuyvesant and the rest of Brooklyn and Queens.
Related Pages
See our Williamsburg, Ridgewood, and Brooklyn pages, plus our mold testing and mold inspection services.
Schedule Mold Testing in Bushwick, Brooklyn, NY
For an independent mold inspector in Bushwick, Brooklyn, NY, contact Prime Environmental NY.
Prime Environmental NY
Phone: (917) 723-2297
Email: primeenvironmentalny@gmail.com
Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)
Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.