Mold Testing & Mold Inspection in Greenwich Village, NY

Mold Testing and Mold Inspection in Greenwich Village, Manhattan

Greenwich Village is broadly bounded by 14th Street on the north, Broadway on the east, Houston Street on the south, and the Hudson River on the west, with Washington Square Park at its historic center. It is part of Manhattan Community District 2 and is served by ZIP codes 10003, 10011, 10012, and 10014. New York University has had a presence here since the 1830s and owns most of the buildings around Washington Square Park.

Prime Environmental NY provides independent mold testing in Greenwich Village and professional mold inspection for rowhouses, walk-ups, co-ops, condominiums, rental apartments, and commercial spaces. We inspect and test only. We do not perform mold removal, remediation, or demolition, so our findings are not tied to any cleanup work.

Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule.

This page focuses on the central and South Village. For the blocks west of Seventh Avenue, see our West Village page.

Two Centuries of Buildings

Most buildings in the Village are mid-rise apartment buildings and 19th-century rowhouses. The Landmarks Preservation Commission designated the Greenwich Village Historic District in 1969 and extended it in 2006 and 2010; the 2010 extension took in 19th- and 20th-century tenements. The Charlton-King-Vandam Historic District, at the Village’s southern edge, holds the city’s largest concentration of Federal-style rowhouses.

Each building type comes with its own moisture questions:

  • Federal-style and 19th-century rowhouses with brick bearing walls, shallow cellars, wood framing, and roofs that have been repaired many times.
  • Tenements and walk-ups with stacked kitchens and bathrooms, steam heat, and air shafts.
  • Prewar and postwar elevator buildings with co-op and rental apartments.
  • University and institutional buildings and student housing.
  • Ground-floor restaurants, bars, and shops beneath apartments.

Where Moisture Tends to Appear

Old Brick and Rowhouse Cellars

Cellars beneath 19th-century houses can be affected by foundation seepage and old drain lines, and they commonly hold the boiler, water heater, and laundry. Brick foundation walls can wick moisture, leaving damp walls, efflorescence, and musty odors.

Roofs, Cornices, and Top-Floor Apartments

Flat roofs, cornices, skylights, and roof hatches are frequent leak points in walk-ups and rowhouses. Top-floor apartments often show the first signs, such as ceiling stains after rain or soft plaster near an exterior wall.

Air Shafts and Interior Bathrooms

Many older walk-ups have bathrooms that open onto narrow air shafts or have no window at all. Without strong exhaust ventilation, moisture from showers can linger, and dark spotting on ceilings and grout is a common complaint.

Leaks Between Stacked Units

In tenements and apartment buildings, kitchens and bathrooms are stacked along shared plumbing lines. A leak upstairs can show up as a stain, bubbling paint, or a musty odor below. We document when evidence suggests moisture is entering from another unit.

Restaurant Basements

Restaurants that use cellar space for storage face their own moisture sources. Walk-in coolers, ice machines, floor drains, and kitchen humidity can keep these spaces damp.

Mold Testing Services

Professional Mold Inspection

A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.

Moisture Investigation

Moisture readings and observations focused on plumbing leaks, roof leaks, window leaks, condensation, humidity, and water intrusion.

Mold Air Sampling and Mold Spore Testing

Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.

Mold Surface Sampling

Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the reliable answer to black mold testing questions.

Indoor Air Quality Testing

Mold-focused indoor air quality testing pairing air sampling with inspection findings.

Post-Remediation Mold Verification

After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.

Residential Mold Testing for Renters, Owners, and Students

If you rent, including in student housing, you can hire us to inspect the areas you can give us access to. Typical concerns:

  • A ceiling stain under an upstairs bathroom
  • Recurring growth in a windowless bathroom
  • Musty odors in a closet on an exterior wall
  • Damp cellar walls in a rowhouse
  • A pre-purchase evaluation of a co-op, condo, or townhouse
  • Independent post-remediation verification

New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other. Tenants should notify their landlord and can call 311 if the problem is not addressed.

Commercial Mold Inspection in the Village

Restaurants, bars, cafes, shops, and offices make up much of the Village’s commercial space. We define the scope with the owner or manager, inspect the agreed areas, sample where helpful, and explain why each sample was collected.

Black Mold Testing

Dark spots on grout, ceilings, or window frames are often called black mold. Color does not identify a mold type. Surface sampling lets a laboratory identify what is growing on a material, and air sampling shows what is airborne compared with outdoor air when an outdoor sample can be collected.

What Your Findings Include

When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps, such as asking management to repair a riser, roof, or window, improving ventilation, or engaging a qualified remediation contractor.

How to Prepare for Your Mold Inspection

  • Leave suspect areas as they are. Cleaning, bleaching, or painting over a stain can remove what a surface sample needs to capture.
  • Keep normal conditions before air sampling. Avoid running air purifiers or airing out the space right before the visit.
  • Make key areas reachable. Clear access to under-sink cabinets, closets on exterior walls, window areas, and the basement or boiler room if they are in scope.
  • Gather the history. Dates of leaks, repairs, renovations, and any earlier testing reports help focus moisture readings and sampling.
  • Arrange access to shared spaces. If the suspected source is in a neighbor’s unit or a building area, let us know who controls access.

NYS Licensed Mold Assessment

Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:

  • Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
  • Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)

Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.

Greenwich Village Mold Testing FAQ

Will testing affect a landmarked building?

No. Our inspections are non-destructive. We do not open walls or remove historic materials.

My bathroom has no window and keeps growing mold. Should I test?

Testing can confirm what is growing, and our moisture investigation can document whether ventilation, a leak, or both appear to be involved.

Do you remove mold?

No. We inspect and test only. If remediation is needed, a separate contractor should perform it, and we can return for post-remediation verification.

Do you serve nearby neighborhoods?

Yes, including the West Village, Chelsea, the East Village, SoHo, and the rest of Manhattan.

Schedule Mold Testing in Greenwich Village

For an independent mold inspector in Greenwich Village, contact Prime Environmental NY.

Prime Environmental NY

Phone: (917) 723-2297

Email: primeenvironmentalny@gmail.com

Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)

Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.