Mold Testing & Mold Inspection in Kingsbridge, Bronx, NY

Mold Testing and Mold Inspection in Kingsbridge, Bronx

Kingsbridge is a residential neighborhood in the northwest Bronx, generally bounded by Manhattan College Parkway on the north, the Major Deegan Expressway or Bailey Avenue on the east, West 230th Street on the south, and Irwin Avenue on the west. It shares Bronx Community District 8 with Riverdale and is served by ZIP code 10463. The 2010 Census counted 30,161 residents in Kingsbridge and Spuyten Duyvil combined.

Prime Environmental NY provides independent mold testing in Kingsbridge and professional mold inspection for houses, apartments, co-ops, condominiums, rental buildings, and commercial spaces. We inspect and test only. We do not perform mold removal or remediation, so our findings are independent of any cleanup work.

Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule.

A Neighborhood Named for a Buried Bridge

Kingsbridge takes its name from the King’s Bridge, likely built in 1693 across Spuyten Duyvil Creek, roughly parallel to today’s 230th Street. It carried the Boston Post Road between southern Westchester and Marble Hill. The creek bed was later filled in, and its water was redirected into a deeper shipping canal south of Marble Hill. Neighboring Kingsbridge Heights, to the east, is home to the James J. Peters VA Medical Center.

Kingsbridge’s housing includes detached, semi-detached, and attached houses along with apartment buildings, many on steep blocks. Step streets, some with as many as 160 steps, connect Kingsbridge with Riverdale on the ridge above.

Moisture Patterns in Kingsbridge Buildings

Steep Blocks and Lower Levels

On steep streets, houses and apartment buildings are often built into the slope, with one side of the basement or ground floor below grade. Rain and snowmelt running downhill can push water against foundation walls, leading to damp basements, efflorescence, and musty odors on the uphill side.

Low-Lying Land Near the Old Creek

The old creek bed was filled in long ago, and properties on lower ground anywhere in the neighborhood can be more prone to water in basements during heavy rain, especially where drainage is overwhelmed.

Attached and Semi-Detached Houses

Shared walls and shared roofs mean a problem next door can affect your side. Roof leaks at parapets and flashing, and plumbing in the house next door, can show up as stains on party walls.

Apartment Buildings

In apartment buildings, kitchens and bathrooms are stacked along shared plumbing lines, and a leak in one unit can appear in the unit below. Steam heat and closed windows in winter raise indoor humidity and can cause condensation on window frames and exterior walls.

Mold Testing Services

Professional Mold Inspection

A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.

Moisture Investigation

Moisture readings and observations focused on plumbing leaks, roof leaks, window leaks, condensation, humidity, and water intrusion.

Mold Air Sampling and Mold Spore Testing

Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.

Mold Surface Sampling

Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the reliable answer to black mold testing questions.

Indoor Air Quality Testing

Mold-focused indoor air quality testing pairing air sampling with inspection findings.

Post-Remediation Mold Verification

After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.

Residential Mold Testing in Kingsbridge

Typical reasons people call:

  • A damp or musty basement after heavy rain
  • A ceiling stain from a leak upstairs
  • Recurring growth in a bathroom with limited ventilation
  • Condensation and dark spotting around windows in winter
  • A landlord preparing a vacant unit, or a tenant documenting conditions
  • A pre-purchase evaluation of a house, co-op, or condo
  • Independent post-remediation verification

New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other. Tenants should notify their landlord and can call 311 if the problem is not addressed.

Commercial Mold Inspection

Kingsbridge’s commercial strips, including Broadway beneath the elevated subway line, have storefronts, restaurants, and offices, often with apartments above. Commercial mold inspection often focuses on cellar storage, kitchens, and bathrooms. We define the scope with the owner or manager and document why each sample was collected.

Black Mold Testing

Color does not identify a mold type. Mold surface sampling lets the laboratory identify what is growing on a material, and mold air sampling shows what is airborne and how indoor air compares with outdoor air when an outdoor comparison sample can be collected.

What Your Findings Include

When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps, such as asking management to repair a riser, roof, or window, improving ventilation, or engaging a qualified remediation contractor.

How to Prepare for Your Mold Inspection

  • Leave suspect areas as they are. Cleaning, bleaching, or painting over a stain can remove what a surface sample needs to capture.
  • Keep normal conditions before air sampling. Avoid running air purifiers or airing out the space right before the visit.
  • Make key areas reachable. Clear access to under-sink cabinets, closets on exterior walls, window areas, and the basement or boiler room if they are in scope.
  • Gather the history. Dates of leaks, repairs, renovations, and any earlier testing reports help focus moisture readings and sampling.
  • Arrange access to shared spaces. If the suspected source is in a neighbor’s unit or a building area, let us know who controls access.

NYS Licensed Mold Assessment

Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:

  • Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
  • Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)

Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.

Kingsbridge Mold Testing FAQ

My basement gets wet only during heavy storms. Is it worth testing?

If materials stay wet or there are odors or staining, an inspection with moisture readings can help determine whether current conditions are a concern.

Can a tenant hire you?

Yes. Tenants can hire us to inspect the areas they can give us access to. We document conditions; we do not make legal determinations.

Do you remove mold?

No. We inspect and test only. If remediation is needed, a separate contractor should do it, and we can return for post-remediation verification.

Do you serve nearby neighborhoods?

Yes, including Kingsbridge Heights, Riverdale, Marble Hill, and all of the Bronx.

Schedule Mold Testing in Kingsbridge

For an independent mold inspector in Kingsbridge, contact Prime Environmental NY.

Prime Environmental NY

Phone: (917) 723-2297

Email: primeenvironmentalny@gmail.com

Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)

Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.