Auburndale Mold Testing and Mold Inspection
Auburndale is a residential neighborhood in northeast Queens between Flushing’s Murray Hill section and Bayside. Its development began in 1901, the year the Long Island Rail Road started serving the area, when developer L. H. Green began building and named the community after his hometown of Auburndale, Massachusetts. The Auburndale station on the Port Washington Branch still connects residents to Manhattan. Today Tudor-style houses are the most common home style, alongside Dutch Colonials and Cape Cods, and Queens Community Board 11 describes a mix that also includes garden apartments, low-rise buildings, and one- and two-family homes.
Prime Environmental NY provides independent mold testing in Auburndale, NY and professional mold inspection for homeowners, two-family owners, renters, buyers, and businesses. We are testing and inspection only. We do not perform mold remediation or removal.
Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule mold testing in Auburndale.
Auburndale Basics
- ZIP code: 11358
- Community district: Queens Community District 11
- Transit: Auburndale station on the LIRR Port Washington Branch
- Housing: Tudors, Dutch Colonials, Cape Cods, one- and two-family homes, low-rise buildings, and garden apartments
- Parks: Peck Park, south of Northern Boulevard
- Population: 19,996 at the 2010 Census, according to figures reported for the neighborhood
Three House Styles, Three Sets of Moisture Questions
Tudor Houses
Auburndale’s most common style features steep, intersecting roofs, prominent chimneys, and sometimes stucco and decorative half-timbering. Valleys, chimney flashing, and stucco cracks are frequent leak points, and leaks tend to show up on upper-floor ceilings, in closets beneath roof valleys, and around the chimney breast.
Dutch Colonials
The gambrel roof creates a full second floor with long shed dormers. The joints where those dormers meet the roof, and the flashing along them, deserve attention. We look for staining on upstairs ceilings and walls and inspect the accessible attic space above.
Cape Cods
Cape Cod upper floors have sloped ceilings and knee-wall storage spaces that can trap condensation and hide roof leaks. Attic mold testing in accessible knee-wall areas is often worthwhile when an upstairs room smells musty.
All Three: Basements
Most of these houses have basements. Basement mold inspection covers foundation walls, floor edges, drains, boilers and water heaters, laundry areas, and finished rooms, with moisture readings to separate old staining from current dampness.
Two-Family Homes and Garden Apartments
In two-family homes and garden apartments, leaks travel between units. A slow drip from an upstairs bathroom often appears as a ceiling stain below, and basement units are more exposed to foundation moisture. We document conditions in the unit being inspected and note when the source appears to be elsewhere. For residential buildings with three or more apartments, New York City’s Department of Housing Preservation and Development (HPD) explains that Local Law 55 requires owners to keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in.
Mold Testing Services
Professional Mold Inspection
A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.
Moisture Investigation
Moisture readings and observations focused on plumbing leaks, roof leaks, flooding, condensation, humidity, and water intrusion.
Mold Air Sampling and Mold Spore Testing
Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.
Mold Surface Sampling
Swab and tape-lift samples from suspect surfaces, analyzed by a laboratory. This is how black mold testing gets a definitive answer.
Indoor Air Quality Testing
Mold-focused indoor air quality testing that pairs air sampling with inspection findings.
Post-Remediation Mold Verification
After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether the evaluated areas meet the applicable clearance criteria.
Commercial Mold Inspection
Auburndale’s businesses along Northern Boulevard and near the station include restaurants, shops, and professional and medical offices. Kitchens, basements, storage rooms, restrooms, and ceilings below roofs or apartments are typical areas of concern. Our commercial mold inspection is scoped to the space and documents findings clearly.
NYS Licensed Mold Assessment
Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses: Mold Assessment Contractor License 26-693HR-SHMO, issued to Prime Environmental NJ LLC, and Mold Assessor License 26-69JDH-SHMO, the individual license of Korab Ibrahimaj. Both are listed in the state’s mold license records on data.ny.gov. New York does not allow the same licensee to both assess and remediate a project, and we only assess and test.
Ice Dams on Steep Roofs
Steep Tudor and Dutch Colonial roofs with limited attic insulation can develop ice dams after snow. Heat escaping into the roof melts snow higher up; the water refreezes at the cold eaves and backs up under shingles. The results can include staining at the top of exterior walls, damp ceilings in upstairs rooms, and wet attic insulation, sometimes followed by musty odors in spring. If you have had ice dam leaks, an inspection of the affected rooms and accessible attic can help determine whether materials are still damp and whether growth has developed.
Buying a Home in Auburndale
Older homes often sell after decades of ownership and multiple renovations. A pre-purchase mold inspection can complement a general home inspection, especially when you notice basement staining, a musty smell, a freshly painted ceiling, or a constantly running dehumidifier. We report what we observe and what the laboratory finds; we do not estimate remediation costs.
Understanding Mold Air Sampling Results
Mold spores are always present in outdoor air, so finding spores indoors is expected. What matters is the comparison and the context:
- Indoor versus outdoor totals: indoor levels well above the outdoor sample collected at the same time can point to an indoor source.
- Spore types: types found indoors that are rare or absent outdoors can be more meaningful than the overall total.
- Water-damage indicators: some fungi are commonly associated with materials that have stayed wet for an extended period.
- Agreement with the inspection: moisture readings, staining, odors, and visible growth help explain what the numbers mean.
There are no federal numeric limits for airborne mold spores in homes, which is why interpretation by the person who inspected the space is valuable. In older homes with open floor registers or drafty windows, indoor air can look similar to outdoor air even when a localized problem exists, so surface sampling and moisture readings remain important.
How the Inspection Works
We start with a phone call about your concerns and which areas to include. On site, we review the home’s history with you, inspect, take moisture readings, photograph conditions, and collect samples according to the scope. Samples go to a laboratory, with turnaround based on the service level selected. When a written report is part of your service, it includes laboratory results, interpretation, observed conditions, and recommendations, such as correcting a moisture source or engaging a qualified remediation contractor.
Preparing for Your Visit
- Leave suspect areas uncleaned and unpainted.
- Keep windows closed as usual before air sampling, and switch off air purifiers shortly before the visit.
- Clear access to the basement, attic hatch, knee-wall doors, and under-sink cabinets.
- Gather dates of leaks, roof work, ice dams, and renovations.
Signs Worth a Professional Look
- A musty smell in the basement, a closet, or an upstairs bedroom
- Stains on ceilings below bathrooms, valleys, or chimneys
- Peeling paint or efflorescence on basement walls
- Spotting around windows that returns each winter
- A leak or water event that was not dried quickly
Bathrooms in Older Homes
Bathrooms in Auburndale’s older houses have often been remodeled more than once, sometimes with new tile installed over old, or with exhaust fans added later that vent into the attic instead of outdoors. When we inspect, we check grout and caulk lines, the floor around the toilet, the wall behind the tub and shower valve, the ceiling below (if the bathroom is upstairs), and where the exhaust fan actually discharges. Recurring growth on a bathroom ceiling usually points to ventilation; staining on the ceiling below usually points to a leak.
Auburndale Mold Testing FAQ
Do you inspect Tudor and Dutch Colonial homes?
Yes. We focus on the areas where these house styles tend to let water in.
Can you test one unit in a two-family house?
Yes. We inspect the unit you can provide access to and note evidence of moisture from elsewhere.
Do you remove mold?
No. We provide independent inspection and testing only.
Which nearby areas do you serve?
Flushing, Bayside, Fresh Meadows, Whitestone, and all of Queens.
Related Pages
See our Flushing, Bayside, and Queens pages, plus our mold testing and mold inspection services.
Schedule Mold Testing in Auburndale, NY
For an independent mold inspector in Auburndale, NY, contact Prime Environmental NY.
Prime Environmental NY
Phone: (917) 723-2297
Email: primeenvironmentalny@gmail.com
Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)
Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.