Mold Testing & Mold Inspection in East New York, Brooklyn, NY

East New York Mold Testing and Mold Inspection

East New York was named with ambition. In 1835, Connecticut merchant John Pitkin bought the land and called it East New York, intending it to rival New York City. Today the neighborhood stretches across eastern Brooklyn from the Queens line to Jamaica Bay. Its housing is mostly semi-detached rowhouses, two- to four-family homes, and apartment buildings, along with eleven NYCHA developments and owner-occupied homes built through the Nehemiah program in the 1980s. In the Spring Creek area, Starrett City is described as the largest subsidized rental complex in the United States, with 5,881 units. A 2016 rezoning has brought new development. The 2010 Census counted 91,958 residents, according to figures reported for the neighborhood.

Prime Environmental NY provides independent mold testing in East New York, Brooklyn and professional mold inspection for homeowners, tenants, landlords, buyers, and businesses. We inspect, sample, and report. We do not perform mold remediation or removal.

Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule mold testing in East New York.

East New York at a Glance

  • Location: eastern Brooklyn, with the Queens line to the north and east, Jamaica Bay to the south, and the rail lines and Van Sinderen Avenue to the west
  • Community district: Brooklyn Community District 5
  • ZIP codes: 11207 and 11208, with Starrett City in 11239
  • Housing: semi-detached rowhouses, two- to four-family homes, apartment buildings, public housing, Nehemiah homes, and Starrett City
  • Shopping: Gateway Center in Spring Creek and neighborhood commercial streets

Rowhouses and Multi-Family Homes

In East New York’s semi-detached rowhouses and two- to four-family homes, typical concerns include:

  • Stacked units, where an upstairs leak shows up as a stain, soft ceiling, or odor below
  • Basements used for storage, laundry, or living space, where foundation dampness appears after heavy rain
  • Shared walls and roof lines with neighbors, where leaks can cross property lines
  • Older roofs and windows that leak during storms
  • Busy households where cooking, showers, and laundry raise indoor humidity

Nehemiah Homes

The Nehemiah program built affordable owner-occupied homes in the 1980s, so many are now around 40 years old. That is the age when original roofs, windows, water heaters, and plumbing often reach the end of their service life. Leaks from aging water heaters and supply lines, roof leaks, and condensation in bathrooms with aging exhaust fans are common reasons owners call us.

Apartment Buildings, Public Housing, and Starrett City

Residents of larger buildings can hire us to inspect the areas of their apartment they can access. Common moisture sources include leaks from units above, risers, roofs, windows, and through-wall air conditioners. New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other. Tenants should notify their landlord and can call 311 if the problem is not addressed.

Near Jamaica Bay

Spring Creek and the southern parts of East New York border Jamaica Bay. Low-lying properties there can be affected by storms and high humidity, and basements and ground floors deserve attention after major storms.

Mold Testing Services

Professional Mold Inspection

A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.

Moisture Investigation

Moisture readings and observations focused on plumbing leaks, roof leaks, flooding, condensation, humidity, and water intrusion.

Mold Air Sampling and Mold Spore Testing

Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.

Mold Surface Sampling

Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the dependable answer to black mold testing questions.

Basement Mold Inspection and Attic Mold Testing

Inspection and sampling in accessible lower levels and attics.

Indoor Air Quality Testing

Mold-focused indoor air quality testing pairing air sampling with inspection findings.

Post-Remediation Mold Verification

After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.

Commercial Mold Inspection

Shops, restaurants, churches, offices, and the large retail spaces at Gateway Center can face moisture in basements, storage areas, kitchens, restrooms, and ceilings beneath roofs. Our commercial mold inspection is scoped to the space and documents findings clearly.

NYS Licensed Mold Assessment

Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:

  • Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
  • Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)

Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.

Ventilation in Busy Households

  • Run bathroom exhaust fans during and after showers, and confirm they vent outdoors.
  • Use a range hood that vents outside when cooking.
  • Make sure the clothes dryer vents outdoors.
  • Keep furniture a few inches from exterior walls.
  • Monitor humidity; the U.S. Environmental Protection Agency recommends keeping it below 60 percent, ideally 30 to 50 percent.

Condensation or Leak?

Many tenants first notice mold in winter, along window frames, in exterior corners, or in closets. Condensation-related growth tends to appear near the coldest surfaces and worsens in the coldest months; better ventilation and humidity control usually help. Leak-related staining follows a path, shows tide lines, and appears after rain or after someone upstairs uses water; it needs a building repair. Moisture readings and the pattern of the staining help tell the difference.

Understanding Air Sampling Results

Mold spores are always present outdoors, so indoor results are compared with an outdoor sample collected at the same time. Indoor totals well above outdoor levels, or spore types rare outdoors, can point to an indoor source. There are no federal numeric limits for airborne mold spores in homes, so interpretation considers what we observed and measured.

What Your Findings Include

When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps.

Signs Worth a Professional Look

  • A musty smell in the basement, a closet, or a bedroom
  • Ceiling stains below bathrooms or kitchens upstairs
  • Damp spots or white deposits on basement walls
  • Spotting around windows during winter
  • A leak that was not dried quickly

How the Inspection Works

We start with a phone call about your concerns and which areas to include. On site, we review the property’s history with you, inspect, take moisture readings, photograph conditions, and collect samples according to the scope. Samples go to a laboratory, with turnaround based on the service level selected. When a written report is part of your service, it includes laboratory results, interpretation, observed conditions, and recommendations.

Preparing for Your Visit

  • Leave suspect areas uncleaned and unpainted.
  • Keep windows closed as usual before air sampling.
  • Clear access to the basement, attic hatch, and under-sink cabinets.
  • Gather records of leaks, repairs, and messages to your landlord.

East New York Mold Testing FAQ

Can I hire you as a tenant?

Yes. You can hire us to evaluate areas you can access.

Do you inspect two- to four-family homes?

Yes. We inspect the units and common areas you can provide access to.

Do you remove mold?

No. We provide independent inspection and testing only.

Which nearby areas do you serve?

Cypress Hills, Brownsville, Canarsie, Bushwick, and all of Brooklyn, plus nearby Queens neighborhoods such as Ozone Park and Woodhaven.

Related Pages

See our Canarsie, Bushwick, Ozone Park, and Brooklyn pages, plus our mold testing and mold inspection services.

Schedule Mold Testing in East New York, Brooklyn, NY

For an independent mold inspector in East New York, Brooklyn, NY, contact Prime Environmental NY.

Prime Environmental NY

Phone: (917) 723-2297

Email: primeenvironmentalny@gmail.com

Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)

Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.