Fort Greene Mold Inspection and Mold Testing
Fort Greene takes its name from a Revolutionary War fortification. Fort Putnam was built here in 1776 and later renamed for General Nathanael Greene. Washington Park, Brooklyn’s first park, opened in 1847, was redesigned by Olmsted and Vaux in 1864, and became Fort Greene Park in 1897; it holds the Prison Ship Martyrs’ Monument. Around the park, tree-lined streets are filled with mid-19th-century Italianate brownstones and rowhouses. The Landmarks Preservation Commission designated the Fort Greene and BAM historic districts in 1978, and the Brooklyn Academy of Music has been a neighborhood anchor since 1908. The 2020 Census counted 32,938 residents, according to figures reported for the neighborhood.
Prime Environmental NY provides independent mold testing in Fort Greene, Brooklyn and professional mold inspection for brownstone owners, renters, co-op and condo owners, buyers, and businesses. We inspect and test only. We do not perform mold remediation, removal, or restoration.
Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule mold testing in Fort Greene.
Fort Greene at a Glance
- Boundaries: Flushing Avenue to the north, Flatbush Avenue to the west, Vanderbilt Avenue to the east, and Atlantic Avenue to the south
- Community district: Brooklyn Community District 2
- ZIP codes: 11201, 11205, 11217, and 11238
- Historic districts: Fort Greene and BAM historic districts, designated in 1978
- Landmarks: Fort Greene Park and the Brooklyn Academy of Music
Italianate Brownstones: What to Know
Mid-19th-century Italianate rowhouses are among the oldest homes in Brooklyn still in everyday use. After more than 150 years, their moisture questions include:
- Ornate cornices and flat roofs where water collects behind parapets and leaks into top floors and stairwells
- Brownstone façades that weather, spall, and are sometimes patched with materials that trap moisture
- Tall parlor-floor windows with original or replacement frames that leak during wind-driven rain
- High stoops and garden levels where water enters beneath the stoop and through areaways
- Cellars with old foundations, boilers, and plumbing
- Plaster walls and ceilings that hide moisture traveling along lath and framing
- Party walls shared with neighbors
Because these homes sit in designated historic districts, exterior work generally requires Landmarks Preservation Commission review. Documenting where water appears to enter helps owners plan the right repair with experienced contractors.
Apartments and Newer Buildings
Fort Greene also includes apartment buildings, co-ops, condominiums, and newer construction near Downtown Brooklyn and Atlantic Avenue. In those buildings, leaks from units above, risers, roofs, windows, and HVAC condensate are common moisture sources. Our professional mold inspection documents conditions in your unit and notes when evidence points elsewhere.
New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other.
Mold Testing Services
Professional Mold Inspection
A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.
Moisture Investigation
Moisture readings and observations focused on plumbing leaks, roof leaks, façade leaks, condensation, humidity, and water intrusion.
Mold Air Sampling and Mold Spore Testing
Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.
Mold Surface Sampling
Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the reliable answer to black mold testing questions.
Basement Mold Inspection
Inspection of cellars and garden levels, where most rowhouse moisture concerns begin.
Indoor Air Quality Testing
Mold-focused indoor air quality testing pairing air sampling with inspection findings.
Post-Remediation Mold Verification
After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.
Commercial Mold Inspection
Fort Greene’s restaurants, cafés, shops, galleries, and cultural organizations, including spaces along DeKalb Avenue, Fulton Street, and near BAM, often occupy older buildings with cellars and apartments above. Commercial mold inspection focuses on cellars and storage rooms, kitchens, restrooms, performance and back-of-house spaces, and ceilings below upper floors.
NYS Licensed Mold Assessment
Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:
- Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
- Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)
Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.
Tall Windows and Winter Condensation
Italianate parlor floors are known for tall windows, and large areas of glass mean large cold surfaces in winter. Warm, humid indoor air condenses on the glass and frames, runs down to the sill, and can soak into wood and plaster below. Over time, that leads to peeling paint, soft wood, and spotting. Wiping condensation, running exhaust fans during cooking and showers, using window treatments that let air reach the glass, and keeping indoor humidity in a reasonable range all help. If damage keeps appearing below windows, moisture readings can show whether condensation, a leak, or both are responsible.
Signs Worth a Professional Look
- A musty smell in the garden level, cellar, or a closet
- Bubbling paint, efflorescence, or soft plaster on front or rear walls
- Peeling paint or soft wood beneath parlor-floor windows
- Top-floor or stairwell ceiling stains after storms
- Water stains around the HVAC unit in newer apartments
- A leak that was not dried quickly
Understanding Air Sampling Results
Mold spores are always present outdoors, so indoor results are compared with an outdoor sample collected at the same time. Older homes with open stairwells and older windows may show indoor results close to outdoor levels even when a localized problem exists, so air sampling is paired with surface sampling and moisture readings. There are no federal numeric limits for airborne mold spores in homes.
What Your Findings Include
When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps.
How the Inspection Works
We start with a phone call about your concerns and which areas to include. On site, we review the home’s history with you, inspect from the cellar up, take moisture readings, photograph conditions, and collect samples according to the scope. Samples go to a laboratory, with turnaround based on the service level selected. When a written report is part of your service, it includes laboratory results, interpretation, observed conditions, and recommendations.
Preparing for Your Visit
- Leave suspect areas uncleaned and unpainted.
- Keep windows closed as usual before air sampling.
- Clear access to the cellar, garden level, under-stoop area, and roof hatch if safe.
- Gather records of façade, roof, and renovation work.
Buying a Brownstone in Fort Greene
Brownstones here often sell after careful renovation, and fresh finishes can make it hard to see past water damage. A pre-purchase mold inspection focused on garden levels, cellars, top floors under older roofs, and recently renovated bathrooms and kitchens can help buyers understand signs of past or present moisture. We take moisture readings and sample where useful, and we report findings without estimating restoration or remediation costs.
Fort Greene Mold Testing FAQ
Do you inspect brownstones in the historic districts?
Yes. We inspect homes throughout Fort Greene.
Can you inspect a garden-level apartment?
Yes. We inspect the areas you can provide access to and note when moisture appears to come from elsewhere in the building.
Do you remove mold?
No. We provide independent inspection and testing only.
Which nearby areas do you serve?
Clinton Hill, Prospect Heights, Brooklyn Heights, Bedford-Stuyvesant, and all of Brooklyn.
Related Pages
See our Brooklyn Heights, Bedford-Stuyvesant, and Brooklyn pages, plus our mold testing and mold inspection services.
Schedule Mold Testing in Fort Greene, Brooklyn, NY
For an independent mold inspector in Fort Greene, Brooklyn, NY, contact Prime Environmental NY.
Prime Environmental NY
Phone: (917) 723-2297
Email: primeenvironmentalny@gmail.com
Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)
Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.