Mold Testing and Mold Inspection in Great Kills, Staten Island
Great Kills is a South Shore neighborhood bordered by Richmondtown to the north, Bay Terrace to the east, Eltingville to the west, and Great Kills Harbor to the south. It is part of Staten Island Community District 3 and is served by ZIP code 10308, with a small part in 10306. The 2020 Census counted 54,699 residents in the Great Kills–Eltingville area, and most occupied homes are owner-occupied, with about 23 percent renter-occupied.
Prime Environmental NY provides independent mold testing in Great Kills and professional mold inspection for houses, apartments, co-ops, condominiums, rental buildings, and commercial spaces. We inspect and test only. We do not perform mold removal or remediation, so our findings are independent of any cleanup work.
Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule.
From Rural Shoreline to Suburban Neighborhood
The area’s eastern half was once called Clarendon and its western half Newtown, and until 1898 the two halves were in different towns. Great Kills remained mostly rural, with shoreline resorts, until the 1950s; after the Verrazzano-Narrows Bridge opened, the neighborhood saw heavy residential growth. Great Kills Park, part of Gateway National Recreation Area, occupies the southeastern corner with a beach, trails, sports fields, and Nichols Marina, and several private marinas line Great Kills Harbor.
A Homeowner’s Neighborhood
With most homes owner-occupied, mold questions in Great Kills are usually whole-house questions. The homeowner is responsible for the basement, the crawl space if there is one, the living floors, the attic, and the roof, and wants to know where moisture is coming from and how far it appears to extend in accessible areas.
Where Moisture Shows Up in Great Kills Homes
Basements and Finished Lower Levels
Basements in Staten Island houses commonly hold the boiler, water heater, laundry, and storage, and many have been finished as family rooms or living space. Foundation seepage after heavy rain, sump and floor-drain problems, plumbing leaks, and condensation on cool walls and pipes are the usual moisture sources. Carpet, drywall, and paneling can hide dampness until odors appear.
Attics and Roofs
Roof leaks, inadequate ventilation, and bathroom or kitchen exhaust fans that vent into the attic can lead to moisture on roof sheathing and rafters. Attic mold testing makes sense after a roof leak or when stains appear on top-floor ceilings.
Crawl Spaces
Some houses sit partly or fully over crawl spaces, which can trap humid air and are rarely visited. Where a crawl space can be safely accessed, we document conditions and collect surface samples as appropriate.
Bathrooms, Kitchens, and Laundry Areas
Slow leaks under sinks, behind toilets, and around tubs, along with washing machine hoses and dishwasher connections, are common sources of hidden moisture.
Additions and Renovations
In houses that have been expanded with dormers, second stories, rear additions, or finished basements, the places where an addition meets the original house, such as roof valleys, wall joints, and foundation seams, can let water in.
Near the Harbor
Great Kills Harbor and the shoreline were heavily damaged by Hurricane Sandy in 2012 and required extensive repair. Homes on low ground near the harbor and the shore can face higher humidity and, in severe storms, coastal flooding. If a home took on water, lower levels and materials that were wet and later covered deserve a closer look.
Mold Testing Services
Professional Mold Inspection
A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.
Moisture Investigation
Moisture readings and observations focused on plumbing leaks, roof leaks, window leaks, condensation, humidity, and water intrusion.
Mold Air Sampling and Mold Spore Testing
Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.
Mold Surface Sampling
Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the reliable answer to black mold testing questions.
Indoor Air Quality Testing
Mold-focused indoor air quality testing pairing air sampling with inspection findings.
Post-Remediation Mold Verification
After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.
Residential Mold Testing in Great Kills
Typical reasons homeowners and renters call:
- A damp or musty basement after heavy rain
- A stain on a top-floor ceiling or in the attic after a roof leak
- Recurring growth in a bathroom or around windows in winter
- A musty odor with no visible source
- A landlord evaluating a rental unit between tenants
- A pre-purchase evaluation before closing
- Independent post-remediation verification after another contractor’s work
Buying or Selling a Home in Great Kills
When a home inspection notes water staining, efflorescence, or musty odors, buyers often want more information before closing. A pre-purchase mold inspection documents accessible conditions and, where useful, collects samples for laboratory analysis. Sellers also use independent mold assessment to understand conditions before listing. We report findings; we do not estimate repair costs or recommend specific remediation companies.
New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other. Tenants should notify their landlord and can call 311 if the problem is not addressed.
Commercial Mold Inspection
Stores, restaurants, offices, and marine businesses along Hylan Boulevard, Amboy Road, and the harbor deal with plumbing leaks, roof leaks, kitchen humidity, and storage areas. We define the scope with the owner or manager and document why each sample was collected.
Black Mold Testing
Color does not identify a mold type. Mold surface sampling lets the laboratory identify what is growing on a material, and mold air sampling shows what is airborne and how indoor air compares with outdoor air when an outdoor comparison sample can be collected.
What Your Findings Include
When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps, such as asking management to repair a riser, roof, or window, improving ventilation, or engaging a qualified remediation contractor.
How to Prepare for Your Mold Inspection
- Leave suspect areas as they are. Cleaning, bleaching, or painting over a stain can remove what a surface sample needs to capture.
- Keep normal conditions before air sampling. Avoid running air purifiers or airing out the space right before the visit.
- Make key areas reachable. Clear access to under-sink cabinets, closets on exterior walls, window areas, and the basement or boiler room if they are in scope.
- Gather the history. Dates of leaks, repairs, renovations, and any earlier testing reports help focus moisture readings and sampling.
- Arrange access to shared spaces. If the suspected source is in a neighbor’s unit or a building area, let us know who controls access.
NYS Licensed Mold Assessment
Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:
- Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
- Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)
Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.
Great Kills Mold Testing FAQ
Can you inspect a whole house, including the attic and crawl space?
Yes, where those areas can be safely accessed. If an area is not accessible, our findings will note that limitation.
My finished basement smells musty. Can you test without removing drywall?
Yes. We inspect accessible surfaces, take moisture readings, and collect air and surface samples as appropriate. We do not open walls; if conditions suggest hidden moisture, our findings will say so.
Do you remove mold?
No. We inspect and test only. If remediation is needed, a separate contractor should do it, and we can return for post-remediation verification.
Do you serve nearby neighborhoods?
Yes, including Bay Terrace, Richmondtown, Eltingville, Annadale, and all of Staten Island.
Schedule Mold Testing in Great Kills
For an independent mold inspector in Great Kills, contact Prime Environmental NY.
Prime Environmental NY
Phone: (917) 723-2297
Email: primeenvironmentalny@gmail.com
Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)
Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.