Mold Testing & Mold Inspection in Hempstead, NY

Mold Testing and Mold Inspection in Hempstead, NY

The Village of Hempstead is the most populous village in New York State and the largest community in both the Town of Hempstead and Nassau County. The 2020 Census counted 59,169 residents. Hempstead is served by ZIP codes 11550 and 11553.

Prime Environmental NY provides independent mold testing in Hempstead and professional mold inspection for houses, condominiums, co-ops, rental properties, and commercial buildings. We inspect and test only. We do not perform mold removal or remediation, so our findings are independent of any cleanup work.

Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule an inspection at your property.

Nassau County’s Oldest English Settlement

Hempstead was settled in 1643, making it the oldest English settlement in present-day Nassau County, and it was incorporated as a village in 1853. St. George’s Church received a silver communion service from Queen Anne in the early 1700s and was used as a headquarters by British forces during the Revolution. Hofstra University’s campus is split between the village and neighboring Uniondale. In the 1990s, the village was redeveloped as a government and business center.

Hempstead’s housing includes single-family homes, multifamily houses, apartment buildings, townhouses, and senior housing.

Where Moisture Shows Up in Hempstead Homes

Apartments, Co-ops, and Condominiums

In multifamily buildings, kitchens and bathrooms are stacked along shared plumbing lines, and a leak in one unit can appear in the unit below. Through-wall air conditioners and HVAC units produce condensate that can wet sills and walls when drains clog. Our findings note when evidence suggests moisture is coming from another unit or a building system.

Basements and Finished Lower Levels

Basements in Long Island houses commonly hold the boiler, water heater, laundry, and storage, and many have been finished as family rooms or living space. Foundation seepage after heavy rain, sump and floor-drain problems, plumbing leaks, and condensation on cool walls and pipes are the usual moisture sources. Carpet, drywall, and paneling can hide dampness until odors appear.

Attics and Roofs

Roof leaks, inadequate ventilation, and bathroom or kitchen exhaust fans that vent into the attic can lead to moisture on roof sheathing and rafters. Attic mold testing makes sense after a roof leak or when stains appear on top-floor ceilings.

Crawl Spaces

Some houses sit partly or fully over crawl spaces, which can trap humid air and are rarely visited. Where a crawl space can be safely accessed, we document conditions and collect surface samples as appropriate.

Bathrooms, Kitchens, and Laundry Areas

Slow leaks under sinks, behind toilets, and around tubs, along with washing machine hoses and dishwasher connections, are common sources of hidden moisture.

Multifamily Houses

In two- and three-family houses, one unit often sits directly above another, with a shared basement. A leak upstairs can show up as a stain below, and basement dampness can affect the first-floor unit. Tenants can hire us to inspect the areas they can give us access to.

Mold Testing Services

Professional Mold Inspection

A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.

Moisture Investigation

Moisture readings and observations focused on plumbing leaks, roof leaks, window leaks, condensation, humidity, and water intrusion.

Mold Air Sampling and Mold Spore Testing

Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.

Mold Surface Sampling

Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the reliable answer to black mold testing questions.

Indoor Air Quality Testing

Mold-focused indoor air quality testing pairing air sampling with inspection findings.

Post-Remediation Mold Verification

After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.

Residential Mold Testing in Hempstead

Typical reasons homeowners and renters call:

  • A damp or musty basement after heavy rain
  • A stain on a top-floor ceiling or in the attic after a roof leak
  • Recurring growth in a bathroom or around windows in winter
  • A musty odor with no visible source
  • A landlord evaluating a rental unit between tenants
  • A pre-purchase evaluation before closing
  • Independent post-remediation verification after another contractor’s work

Buying or Selling a Home in Hempstead

When a home inspection notes water staining, efflorescence, or musty odors, buyers often want more information before closing. A pre-purchase mold inspection documents accessible conditions and, where useful, collects samples for laboratory analysis. Sellers also use independent mold assessment to understand conditions before listing. We report findings; we do not estimate repair costs or recommend specific remediation companies.

Commercial Mold Inspection

Offices, government-related buildings, stores, restaurants, and medical practices in the village center and along its commercial corridors deal with plumbing leaks, roof leaks, HVAC condensate, kitchen humidity, and storage areas. We define the scope with the owner or manager and document why each sample was collected.

Black Mold Testing

Color does not identify a mold type. Mold surface sampling lets the laboratory identify what is growing on a material, and mold air sampling shows what is airborne and how indoor air compares with outdoor air when an outdoor comparison sample can be collected.

What Your Findings Include

When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps, such as asking management to repair a riser, roof, or window, improving ventilation, or engaging a qualified remediation contractor.

How to Prepare for Your Mold Inspection

  • Leave suspect areas as they are. Cleaning, bleaching, or painting over a stain can remove what a surface sample needs to capture.
  • Keep normal conditions before air sampling. Avoid running air purifiers or airing out the space right before the visit.
  • Make key areas reachable. Clear access to under-sink cabinets, closets on exterior walls, window areas, and the basement or boiler room if they are in scope.
  • Gather the history. Dates of leaks, repairs, renovations, and any earlier testing reports help focus moisture readings and sampling.
  • Arrange access to shared spaces. If the suspected source is in a neighbor’s unit or a building area, let us know who controls access.

NYS Licensed Mold Assessment

Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:

  • Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
  • Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)

Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.

Hempstead Mold Testing FAQ

Can a tenant hire you directly?

Yes. Tenants can hire us to inspect the areas they can give us access to. We document conditions and laboratory results; we do not make legal determinations.

Is this the Village of Hempstead or the Town?

This page covers the Village of Hempstead. We serve communities throughout the Town of Hempstead as well.

Do you remove mold?

No. We inspect and test only. If remediation is needed, a separate contractor should do it, and we can return for post-remediation verification.

Do you serve nearby communities?

Yes, including Uniondale, West Hempstead, Roosevelt, Garden City, East Meadow, and the rest of Long Island.

Schedule Mold Testing in Hempstead

For an independent mold inspector in Hempstead, contact Prime Environmental NY.

Prime Environmental NY

Phone: (917) 723-2297

Email: primeenvironmentalny@gmail.com

Long Island Address: 400 Kensington Ln, Bethpage, NY 11714 (inspections by appointment at your property)

Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.