Kew Gardens Mold Inspection and Mold Testing
Kew Gardens takes its name from the Royal Botanic Gardens at Kew in England, and it was one of several planned garden communities built in Queens between the late 1800s and 1950. The land was part of an estate acquired in 1868 by Albon P. Man, and in 1910 the estate began selling parcels for development. The first apartment building, the Kew Bolmer, went up in 1915, and the 1920s brought elegant one-family houses and apartment buildings, with English and neo-Tudor styles that still dominate many blocks. Today Kew Gardens is mostly apartment buildings of four to ten stories, along with one-family homes and co-ops, with Forest Park to the west and Queens Borough Hall at its northern edge.
Prime Environmental NY provides independent mold testing in Kew Gardens, NY and professional mold inspection for co-op shareholders, renters, homeowners, landlords, buyers, and businesses. Our work is limited to inspection, sampling, laboratory analysis, and reporting. We do not perform mold remediation or removal.
Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule mold testing in Kew Gardens.
Kew Gardens Overview
- ZIP code: 11415
- Community district: Queens Community District 9
- Boundaries: Union Turnpike and the Jackie Robinson Parkway to the north, Hillside Avenue to the south, the Van Wyck Expressway and 131st Street to the east, and Park Lane, Abingdon Road, and 118th Street to the west
- Commercial center: Lefferts Boulevard between Austin Street and Metropolitan Avenue
- Nearby: Forest Park to the west and Flushing Meadows–Corona Park to the north
- Population: 24,371 in 2020, according to figures reported for the neighborhood
Apartment and Co-op Mold Inspection in Kew Gardens
Most Kew Gardens residents live in apartment buildings built from the 1910s onward. Many are now co-ops. In these buildings we often evaluate:
Leaks From Above
Kitchens and bathrooms are typically stacked. A leak from a tub, toilet, or supply line in the unit above can stain a ceiling or wall and create conditions for growth below.
Risers and Radiators
Older buildings rely on vertical plumbing risers and steam or hot-water radiators. Leaks at riser joints, radiator valves, and air vents are common moisture sources.
Roofs and Top-Floor Units
Top-floor apartments are the first to show roof, drain, and bulkhead leaks.
Windows and Exterior Walls
Wind-driven rain can enter around older window frames and through masonry, and condensation on cold walls in winter can lead to spotting in corners and closets.
Interior Bathrooms
Bathrooms without windows depend on exhaust ventilation. Weak exhaust leaves ceilings and grout damp after showers.
We document what we observe in your unit, take moisture readings, sample where useful, and note when evidence suggests the moisture source is outside the apartment. That gives shareholders, renters, boards, and managing agents a factual basis for next steps.
House Mold Inspection in Kew Gardens
Kew Gardens’ Tudor-style and other one-family houses are now roughly a century old. Common inspection areas include:
- Basements: foundation walls, floor edges, drains, mechanical areas, and finished rooms
- Attics and upper floors: roof sheathing, framing, and knee-wall spaces under steep roofs, where accessible
- Exterior details: chimneys, dormers, valleys, stucco, and half-timbering details that can admit water if flashing or sealants fail
- Kitchens and bathrooms: fixtures and plumbing connections that leak over time
Mold Testing Services
Professional Mold Inspection
A visual assessment of accessible areas in your scope, looking for suspected microbial growth, water damage, and conditions that support mold.
Moisture Investigation
Moisture readings and observations focused on plumbing leaks, roof leaks, flooding, condensation, humidity, and water intrusion.
Mold Air Sampling and Mold Spore Testing
Indoor air samples, along with an outdoor comparison sample when conditions allow, analyzed by a laboratory to identify and count airborne fungal spores.
Mold Surface Sampling
Swab and tape-lift samples of suspect growth, analyzed by a laboratory. Surface sampling is the reliable way to answer black mold testing questions.
Indoor Air Quality Testing
Mold-focused indoor air quality testing combining air sampling with inspection findings and interpretation.
Post-Remediation Mold Verification
After a separate contractor finishes remediation, we perform an independent visual inspection and appropriate sampling to assess whether the evaluated areas meet the applicable clearance criteria.
Commercial Mold Inspection on Lefferts Boulevard and Nearby
Kew Gardens’ commercial center along Lefferts Boulevard and Austin Street includes restaurants, cafés, shops, and services, often in mixed-use buildings with apartments above. Near Queens Borough Hall and the courts, there are law offices and professional suites. Commercial mold inspection for these spaces focuses on kitchens, storage areas, basements, restrooms, and ceilings below apartments or roof equipment. We explain each sample location in the findings.
Local Law 55 and Kew Gardens Rentals
New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other. Tenants should notify their landlord and can use 311 if the issue is not addressed.
NYS Mold Assessment Licenses
Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:
- Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
- Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)
Both appear in the state’s mold license records on data.ny.gov. New York does not allow the same licensee to assess and remediate a project, and we only assess and test.
For Co-op Boards and Managing Agents
Kew Gardens has many cooperative buildings, and boards are often asked to respond when a shareholder reports mold. An independent mold assessment can help a board:
- Understand whether the moisture source is inside the apartment or in a building system such as a riser, roof, or façade
- Obtain laboratory data that both the board and the shareholder can rely on
- Document conditions before and after repairs
- Keep assessment and remediation separate, consistent with New York State requirements
We can inspect an individual apartment, multiple affected units, or common areas such as basements, laundry rooms, and storage rooms, depending on the scope agreed with the building.
Preparing for Your Inspection
- Leave suspect areas uncleaned and unpainted so they can be documented and sampled.
- Keep windows closed as usual before air sampling, and avoid running air purifiers right before the visit.
- Check whether your building requires advance notice or a certificate of insurance for inspectors.
- Clear access to closets, under-sink cabinets, radiators, and windows in affected rooms.
- Gather dates of leaks, work orders, and notices from management.
How to Tell Condensation From a Leak
Winter mold on window frames and exterior wall corners is often caused by condensation rather than a leak. Condensation-related growth tends to appear in a band near the coldest surfaces, worsens in the coldest months, and improves in summer. Leak-related staining often follows a path, appears after rain or after neighbors use water, and may show rings or tide lines. Moisture readings taken at the right time help confirm which is happening, and the answer determines whether the fix is better ventilation and humidity control or a building repair.
What We Need From You
The more we know about a space, the more focused an inspection can be. Before the visit, it helps to think about:
- When you first noticed the problem, and whether it has gotten better or worse over time
- Whether it changes with the weather, such as after rain or during the heating season
- Recent events, like a leak upstairs, a roof repair, new windows, or a renovation
- Who controls nearby spaces, such as the apartment above, the roof, or the boiler room
- Health concerns in the household that prompted the call, if any, so we can focus the scope appropriately
Every piece of this history helps connect what we observe and what the laboratory finds to the conditions in your home.
Kew Gardens Mold Testing FAQ
Can you test my co-op apartment without involving the board?
You can generally hire an inspector for your own apartment. Access to other units or common areas requires permission from the building.
Do you inspect Tudor homes?
Yes. We inspect houses throughout Kew Gardens, including basements, attics, and upper floors.
Do you remove mold?
No. We provide independent inspection and testing only.
Which nearby areas do you serve?
Forest Hills, Richmond Hill, Kew Gardens Hills, Briarwood, Jamaica, and the rest of Queens.
How quickly will I get results?
Laboratory turnaround depends on the service level selected.
Related Pages
See our Forest Hills, Jamaica, and Queens pages, and our mold testing and mold inspection services.
Schedule Mold Testing in Kew Gardens, NY
For an independent mold inspector in Kew Gardens, NY, contact Prime Environmental NY.
Prime Environmental NY
Phone: (917) 723-2297
Email: primeenvironmentalny@gmail.com
Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)
Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.