Mold Testing & Mold Inspection in Mott Haven, Bronx, NY

Mold Testing and Mold Inspection in Mott Haven, Bronx

Mott Haven is the southernmost neighborhood of the Bronx, generally bounded by East 149th Street on the north, the Bruckner Expressway on the east and south, and the Harlem River on the west. It is part of Bronx Community District 1 and is served by ZIP codes 10451, 10454, and 10455. The 2020 Census counted 54,163 residents. Together with neighboring Port Morris, Mott Haven was the first area to be called the “South Bronx.”

Prime Environmental NY provides independent mold testing in Mott Haven and professional mold inspection for houses, apartments, co-ops, condominiums, rental buildings, and commercial spaces. We inspect and test only. We do not perform mold removal or remediation, so our findings are independent of any cleanup work.

Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule.

Rowhouses, Tenements, and Public Housing

Mott Haven was founded in 1849, when Jordan Lawrence Mott bought land for his iron works along the Harlem River; a remnant of the works is still visible near the Third Avenue Bridge on East 134th Street. The neighborhood’s 19th-century residential core survives in several historic districts:

  • Mott Haven Historic District, along Alexander Avenue between East 138th and 141st Streets, with rowhouses from the second half of the 19th century.
  • Mott Haven East Historic District, on East 139th and 140th Streets between Brook and Willis Avenues, with brownstones from 1883.
  • Bertine Block Historic District, on East 136th Street, with brownstones built between 1891 and 1895.

Most of the neighborhood is made up of tenement-style apartment buildings and large public housing complexes; Mott Haven has 17 NYCHA developments, one of the highest concentrations in the Bronx. Newer buildings, including condominiums and affordable housing, have gone up along the East 138th Street corridor.

Where Moisture Shows Up in Mott Haven Buildings

Leaks Between Stacked Apartments

In apartment buildings, kitchens and bathrooms are stacked along shared plumbing risers. A leak from an upstairs tub, toilet, or sink can show up in the unit below as a ceiling stain, bubbling paint, or soft plaster. Our findings note when evidence suggests moisture is coming from another unit or a building system.

Steam Heat and Winter Condensation

Many older Bronx apartment buildings are heated by steam. Leaking radiator valves, cooking, showers, and closed windows raise indoor humidity in winter, and condensation collects on window frames, exterior corners, and closets on outside walls.

Roofs and Top-Floor Units

Flat roofs, parapets, and roof drains are common leak points. Top-floor apartments often see the first signs after heavy rain.

Basements and Building Cellars

Building basements hold boilers, laundry rooms, and storage, and they can stay damp from foundation seepage, plumbing leaks, and humidity.

Brownstones and Rowhouses

In the historic districts, 19th-century rowhouses and brownstones have their own moisture sources: cellars beneath the house, flat roofs and cornices, skylights, and brownstone facades that can absorb water where the stone has deteriorated. Party walls mean a leak next door can appear on your side.

Low-Lying Land Near the River

Mott Haven’s terrain is mostly low and flat, except near St. Mary’s Park. Low-lying basements and ground floors, especially near the Harlem River, can be affected by heavy rain and coastal storms.

Mold Testing Services

Professional Mold Inspection

A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.

Moisture Investigation

Moisture readings and observations focused on plumbing leaks, roof leaks, window leaks, condensation, humidity, and water intrusion.

Mold Air Sampling and Mold Spore Testing

Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.

Mold Surface Sampling

Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the reliable answer to black mold testing questions.

Indoor Air Quality Testing

Mold-focused indoor air quality testing pairing air sampling with inspection findings.

Post-Remediation Mold Verification

After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.

Residential Mold Testing in Mott Haven

Typical reasons people call:

  • A ceiling stain or leak from the apartment above
  • Recurring growth in a bathroom with limited ventilation
  • Condensation and dark spotting around windows in winter
  • A musty odor in a closet or bedroom on an exterior wall
  • A damp cellar in a brownstone or rowhouse
  • A landlord preparing a vacant unit for a new tenant
  • Documentation for a landlord, managing agent, or co-op or condo board
  • Independent post-remediation verification after another contractor’s work

New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other. Tenants should notify their landlord and can call 311 if the problem is not addressed.

Public Housing Residents

NYCHA residents generally report repairs, including mold and leaks, directly to NYCHA. If you live in public housing and want independent documentation of conditions in your apartment, you can hire us to inspect the areas you can give us access to; we report what we observe and what the laboratory finds.

Commercial Mold Inspection in Mott Haven and Port Morris

Stores and restaurants along East 138th Street and Third Avenue, and the warehouses and businesses of Port Morris, deal with plumbing leaks, roof leaks, kitchen humidity, and storage areas. We define the scope with the owner or manager and document why each sample location was chosen.

Black Mold Testing

Color does not identify a mold type. Mold surface sampling lets the laboratory identify what is growing on a material, and mold air sampling shows what is airborne and how indoor air compares with outdoor air when an outdoor comparison sample can be collected.

What Your Findings Include

When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps, such as asking management to repair a riser, roof, or window, improving ventilation, or engaging a qualified remediation contractor.

How to Prepare for Your Mold Inspection

  • Leave suspect areas as they are. Cleaning, bleaching, or painting over a stain can remove what a surface sample needs to capture.
  • Keep normal conditions before air sampling. Avoid running air purifiers or airing out the space right before the visit.
  • Make key areas reachable. Clear access to under-sink cabinets, closets on exterior walls, window areas, and the basement or boiler room if they are in scope.
  • Gather the history. Dates of leaks, repairs, renovations, and any earlier testing reports help focus moisture readings and sampling.
  • Arrange access to shared spaces. If the suspected source is in a neighbor’s unit or a building area, let us know who controls access.

NYS Licensed Mold Assessment

Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:

  • Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
  • Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)

Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.

Mott Haven Mold Testing FAQ

Can you inspect a brownstone in the historic district?

Yes. Our inspections are non-destructive. We inspect accessible areas, take moisture readings, and sample where helpful, without opening walls.

Can a tenant hire you directly?

Yes. Tenants can hire us to inspect the areas of their apartment they can give us access to. We do not make legal determinations.

Do you remove mold?

No. We inspect and test only. If remediation is needed, a separate contractor should do it, and we can return for post-remediation verification.

Do you serve nearby neighborhoods?

Yes, including Port Morris, Melrose, Hunts Point, and all of the Bronx.

Schedule Mold Testing in Mott Haven

For an independent mold inspector in Mott Haven, contact Prime Environmental NY.

Prime Environmental NY

Phone: (917) 723-2297

Email: primeenvironmentalny@gmail.com

Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)

Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.