Mold Testing and Mold Inspection in Murray Hill, Manhattan
Murray Hill is an East Side neighborhood generally described as lying between 34th Street and 42nd Street, east of Fifth or Madison Avenue toward the East River. It is part of Manhattan Community District 6 and is served by ZIP codes 10016 and 10017. The name comes from the Murray family, whose 18th-century farm, associated with Robert Murray, once occupied the hill. The 2010 Census counted 10,864 residents in the neighborhood’s core.
Prime Environmental NY provides independent mold testing in Murray Hill and professional mold inspection for apartments, co-ops, condominiums, townhouses, offices, and storefronts. We inspect and test only, with no mold removal, remediation, or demolition, so our findings stay independent.
Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule.
This page covers Murray Hill in Manhattan. For the Murray Hill section of Queens, see our Flushing page.
Murray Hill’s Building Stock
Murray Hill developed as a fashionable residential district in the mid-19th century, and many brownstone rowhouses from that era remain on its side streets. The Landmarks Preservation Commission designated the Murray Hill Historic District in 2002. Alongside the rowhouses, the neighborhood has prewar apartment buildings, postwar high-rise rentals and co-ops, newer condominiums, and commercial and office buildings closer to Midtown.
For a mold inspector in Murray Hill, that means very different moisture questions depending on the address:
- Brownstones and townhouses with cellars, flat roofs, parapets, skylights, and shared party walls.
- Prewar apartment buildings with steam heat, plaster walls, and plumbing stacked along risers.
- Postwar and newer high-rises with through-wall air-conditioning sleeves, fan coil units, and many stacked bathrooms and kitchens.
- Mixed-use and commercial buildings with restaurants and stores on the ground floor and offices above.
Common Moisture Sources We Look For
Brownstone Cellars and Roofs
Brownstone cellars can take on moisture through foundation walls and older drain lines, and they often hold the boiler, water heater, and laundry. At the top of the house, flat roofs, flashing, and skylights are frequent leak points. Brownstone facades themselves can absorb water where the stone has deteriorated or been patched.
Leaks Between Apartments
In apartment buildings, a leak from a bathroom or kitchen above often shows up as a ceiling stain, peeling paint, or a musty odor below. We document conditions inside your unit and note when the evidence suggests moisture is coming from another unit or a building system.
Air-Conditioning Sleeves and Fan Coil Units
Through-wall air conditioners and fan coil units produce condensate. When drains clog or sleeves are not properly sealed, water can drip into walls, sills, and floors. These areas are worth checking when there is staining or odor near a window or exterior wall.
Winter Condensation
Steam heat, cooking, showers, and closed windows can raise indoor humidity in winter. Condensation then forms on the coldest surfaces, such as window frames, exterior corners, and closets on outside walls.
Mold Testing Services
Professional Mold Inspection
A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.
Moisture Investigation
Moisture readings and observations focused on plumbing leaks, roof leaks, window leaks, condensation, humidity, and water intrusion.
Mold Air Sampling and Mold Spore Testing
Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.
Mold Surface Sampling
Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the reliable answer to black mold testing questions.
Indoor Air Quality Testing
Mold-focused indoor air quality testing pairing air sampling with inspection findings.
Post-Remediation Mold Verification
After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.
Residential Mold Testing in Murray Hill
Typical reasons people call:
- A ceiling stain after a leak from upstairs
- Dark spotting on window frames or bathroom caulk that keeps returning
- A musty smell in a closet or near an air-conditioning sleeve
- Moisture in a brownstone cellar after heavy rain
- A pre-purchase evaluation of a co-op, condo, or townhouse
- Independent clearance testing after another company’s remediation
New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other. Tenants should notify their landlord and can call 311 if the problem is not addressed.
Commercial Mold Inspection in Murray Hill
Murray Hill’s commercial spaces include restaurants and ground-floor retail along the avenues, medical and professional offices, and office floors near Midtown. We define the scope with the owner or manager, inspect the agreed areas, collect samples where helpful, and document the reasons for each sample location.
Black Mold Testing
Color alone does not identify a mold type. Mold surface sampling lets the laboratory identify what is growing on a material, and mold air sampling shows what is airborne and how indoor air compares with outdoor air when an outdoor sample can be collected.
What Your Findings Include
When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps, such as asking management to repair a riser, roof, or window, improving ventilation, or engaging a qualified remediation contractor.
NYS Licensed Mold Assessment
Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:
- Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
- Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)
Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.
How to Prepare for an Inspection
- Do not clean or paint over suspect areas. That can remove what a surface sample needs to capture.
- Keep normal conditions before air sampling. Avoid running air purifiers or airing out the apartment right before the visit.
- Make key areas reachable. Clear access to under-sink cabinets, closets on exterior walls, air-conditioning sleeves, and the cellar or boiler room if they are in scope.
- Gather the history. Dates of leaks, repairs, renovations, and any prior testing reports help focus the visit.
- Arrange access to shared spaces. If the suspected source is in a neighbor’s unit or a building area, let us know who controls access.
Murray Hill Mold Testing FAQ
Can you inspect a brownstone from cellar to roof?
Yes. We inspect the accessible areas included in the agreed scope, which can include the cellar, every living floor, and accessible roof or attic areas.
My problem started after the apartment above had a leak. Can you help?
Yes. We inspect the areas of your apartment you give us access to and document conditions that suggest moisture entered from above.
Do you do mold removal?
No. We inspect and test only. If remediation is needed, a separate contractor should do it, and we can return for post-remediation verification.
Do you serve nearby neighborhoods?
Yes, including Midtown, Kips Bay, Gramercy Park, and the rest of Manhattan.
Schedule Mold Testing in Murray Hill, Manhattan
For an independent mold inspector in Murray Hill, Manhattan, contact Prime Environmental NY.
Prime Environmental NY
Phone: (917) 723-2297
Email: primeenvironmentalny@gmail.com
Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)
Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.