Mold Testing and Mold Inspection in Port Richmond, Staten Island
Port Richmond is a North Shore neighborhood bounded by the Kill Van Kull on the north, Clove Road on the east, Forest Avenue on the south, and the Bayonne Bridge on the west. It borders West New Brighton, Westerleigh, Elm Park, and Mariners Harbor. Port Richmond is part of Staten Island Community District 1 and is served by ZIP code 10302. The 2020 Census counted 22,609 residents in about 1.06 square miles.
Prime Environmental NY provides independent mold testing in Port Richmond and professional mold inspection for houses, apartments, co-ops, condominiums, rental buildings, and commercial spaces. We inspect and test only. We do not perform mold removal or remediation, so our findings are independent of any cleanup work.
Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule.
A 19th-Century Village on the Kill Van Kull
Port Richmond grew up around a Dutch Reformed church and cemetery and was incorporated as a village in 1866. In the 19th century it was an industrial and transportation hub, with a whale oil plant, a linseed oil plant, and lumber and coal yards, and ferries ran from its waterfront to Bergen Point in what is now Bayonne. The Bayonne Bridge, completed in 1931, forms its western edge.
The neighborhood’s older buildings tell that story: the Reformed Church on Staten Island, built in 1845 in Greek Revival style; captains’ mansions on Richmond Terrace from the 1840s and 1850s; the 121 Heberton Avenue House, a Rustic-style villa from around 1860; and the Old PS 20 building from 1891. Port Richmond Avenue, once the village’s main commercial street, has seen many small businesses open in recent years. Residential blocks include older houses, attached and semi-detached homes, and small multifamily buildings.
Moisture Concerns in Port Richmond Buildings
Older Wood-Frame Houses
Victorian-era and early 20th-century houses often have wood siding, porches, complex roofs, and stone or brick foundations. Each roof valley, dormer, chimney, and porch connection is a potential leak point, and older foundations can let moisture into basements and crawl spaces. Stains on top-floor ceilings, in attics, and along basement walls are the usual first signs.
Attached and Multifamily Houses
In attached and two-family houses, shared walls and stacked units mean a leak next door or upstairs can show up on your side. Basements often hold the boiler, water heater, and laundry, and foundation seepage and plumbing leaks can keep them damp.
Mixed-Use Buildings on Port Richmond Avenue
Older commercial buildings with apartments above combine ground-floor plumbing, kitchen humidity, and cellar storage with residential bathrooms and kitchens upstairs. A problem on one floor can affect another.
Near the Kill Van Kull
Properties close to the Kill Van Kull waterfront and on lower ground can face higher humidity and, in severe storms, the possibility of flooding. Homes that have taken on water before deserve a closer look at lower levels.
Basements
Basements in Bronx houses typically hold the boiler, water heater, laundry, and storage, and many have been finished as living space. Foundation seepage after heavy rain, leaking supply lines, sump or floor-drain backups, and condensation on cool walls and pipes are the usual moisture sources. Finished walls, carpet, and paneling can hide dampness until odors appear.
Attics and Roofs
Roof leaks, poor attic ventilation, and bathroom exhaust fans that vent into the attic can lead to moisture on roof sheathing and rafters. Attic mold testing makes sense after a roof leak or when stains appear on top-floor ceilings.
Bathrooms, Kitchens, and Laundry Areas
Slow leaks under sinks, behind toilets, and around tubs, along with washing machine hoses and dishwasher connections, are common sources of hidden moisture.
Mold Testing Services
Professional Mold Inspection
A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.
Moisture Investigation
Moisture readings and observations focused on plumbing leaks, roof leaks, window leaks, condensation, humidity, and water intrusion.
Mold Air Sampling and Mold Spore Testing
Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.
Mold Surface Sampling
Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the reliable answer to black mold testing questions.
Indoor Air Quality Testing
Mold-focused indoor air quality testing pairing air sampling with inspection findings.
Post-Remediation Mold Verification
After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.
Residential Mold Testing in Port Richmond
Typical reasons people call:
- A damp or musty basement after heavy rain
- A roof leak in an older house
- A ceiling stain from a leak in the unit above
- Condensation and growth around windows in winter
- A landlord preparing a rental unit for a new tenant
- A pre-purchase evaluation of an older house
- Independent post-remediation verification
New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other. Tenants should notify their landlord and can call 311 if the problem is not addressed.
Commercial Mold Inspection
Stores, restaurants, and offices along Port Richmond Avenue, Richmond Terrace, and Forest Avenue deal with plumbing leaks, kitchen humidity, and cellar storage. We define the scope with the owner or manager and document why each sample was collected.
Black Mold Testing
Color does not identify a mold type. Mold surface sampling lets the laboratory identify what is growing on a material, and mold air sampling shows what is airborne and how indoor air compares with outdoor air when an outdoor comparison sample can be collected.
What Your Findings Include
When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps, such as asking management to repair a riser, roof, or window, improving ventilation, or engaging a qualified remediation contractor.
How to Prepare for Your Mold Inspection
- Leave suspect areas as they are. Cleaning, bleaching, or painting over a stain can remove what a surface sample needs to capture.
- Keep normal conditions before air sampling. Avoid running air purifiers or airing out the space right before the visit.
- Make key areas reachable. Clear access to under-sink cabinets, closets on exterior walls, window areas, and the basement or boiler room if they are in scope.
- Gather the history. Dates of leaks, repairs, renovations, and any earlier testing reports help focus moisture readings and sampling.
- Arrange access to shared spaces. If the suspected source is in a neighbor’s unit or a building area, let us know who controls access.
NYS Licensed Mold Assessment
Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:
- Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
- Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)
Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.
Port Richmond Mold Testing FAQ
Can you inspect a 19th-century house?
Yes. Our inspections are non-destructive. We inspect accessible areas, take moisture readings, and sample where helpful, without opening walls.
Can a tenant hire you directly?
Yes. Tenants can hire us to inspect the areas they can give us access to. We do not make legal determinations.
Do you remove mold?
No. We inspect and test only. If remediation is needed, a separate contractor should do it, and we can return for post-remediation verification.
Do you serve nearby neighborhoods?
Yes, including West Brighton, Elm Park, Mariners Harbor, Westerleigh, and all of Staten Island.
Schedule Mold Testing in Port Richmond
For an independent mold inspector in Port Richmond, contact Prime Environmental NY.
Prime Environmental NY
Phone: (917) 723-2297
Email: primeenvironmentalny@gmail.com
Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)
Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.