Mold Testing & Mold Inspection in Red Hook, Brooklyn, NY

Red Hook Mold Inspection and Mold Testing

Red Hook is a waterfront peninsula in western Brooklyn, surrounded by Buttermilk Channel, Gowanus Bay, and the Gowanus Canal. Dutch colonists settled here in 1636, and dredging in the mid-1800s turned Red Hook into one of the busiest ports in the country, handling up to 26,000 ships a year before declining later in the century. Dockworkers lived in boarding houses and rowhouses near the piers. In 1939, the Red Hook Houses were completed on the site of a former Depression-era shantytown; today they form Brooklyn’s largest public housing development, home to about 6,000 people. When Hurricane Sandy struck in 2012, it heavily damaged Red Hook.

Prime Environmental NY provides independent mold testing in Red Hook, Brooklyn and professional mold inspection for homeowners, tenants, landlords, artists, and businesses in its warehouses and waterfront buildings. We inspect, sample, and report. We do not perform mold remediation or removal.

Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule mold testing in Red Hook.

Red Hook at a Glance

  • Location: a peninsula bordered by Buttermilk Channel, Gowanus Bay, and the Gowanus Canal, with the Gowanus Expressway and Carroll Gardens to the northeast
  • Community district: Brooklyn Community District 6
  • ZIP code: 11231
  • Housing: 19th-century rowhouses, the Red Hook Houses, converted warehouses, and newer buildings
  • Waterfront: former piers and industrial buildings, many now home to businesses, studios, and retail

Living With Water on Three Sides

Red Hook’s location makes water a constant factor. Low-lying streets near the waterfront can flood during storms and high tides, ground floors and cellars are exposed to storm surge, and humidity is often higher near the water. Sandy’s damage showed how quickly lower levels can fill. Buildings that took on water may have been repaired in ways that enclosed materials that were once wet. A water damage mold inspection with moisture readings can clarify current conditions in cellars, ground floors, and areas renovated after storms.

Rowhouses Near the Old Port

Red Hook’s older rowhouses, some built for workers when the port was busy, share familiar moisture patterns: flat roofs and parapets that leak into top floors, brick façades with eroded mortar, party walls that carry moisture from neighbors, and cellars that take on water. In homes near the water, cellars and ground floors deserve particular attention after storms.

Warehouses, Studios, and Waterfront Businesses

Red Hook’s former industrial and port buildings now hold a range of commercial uses. These large structures have flat roofs, aging windows, loading doors, and ground floors close to the water. Stored materials such as paper, cardboard, wood, and textiles can be damaged by humidity and flooding. Our commercial mold inspection is scoped to the space, documents conditions, and explains every sample location.

Public Housing and Apartment Buildings

Residents of the Red Hook Houses and other apartment buildings can hire us to inspect the areas of their apartment they can access. New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. Tenants should notify their landlord and can call 311 if the problem is not addressed.

Mold Testing Services

Professional Mold Inspection

A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.

Moisture Investigation

Moisture readings and observations focused on flooding, plumbing leaks, roof leaks, condensation, humidity, and water intrusion.

Mold Air Sampling and Mold Spore Testing

Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.

Mold Surface Sampling

Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the dependable answer to black mold testing questions.

Basement Mold Inspection

Inspection of cellars and ground floors, where flooding and humidity have the greatest effect.

Indoor Air Quality Testing

Mold-focused indoor air quality testing pairing air sampling with inspection findings.

Post-Remediation Mold Verification

After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.

NYS Licensed Mold Assessment

Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:

  • Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
  • Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)

Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.

After a Coastal Storm

  • Avoid floodwater, which can be contaminated, and stay away from wet electrical equipment.
  • Document damage with dated photos and video.
  • Remove water and begin drying as soon as it is safe.
  • Follow insurer and contractor guidance on porous materials that cannot be dried promptly.
  • Watch for odors, staining, or bubbling paint in the following weeks and schedule an inspection if they appear.

Sewer Backups, Surge, and Rain: Different Kinds of Water

Water can reach Red Hook buildings in several ways, and the source affects what should happen next:

  • Storm surge and tidal flooding bring bay water into ground floors and cellars during major storms.
  • Sewer backups push water up through floor drains and fixtures during intense rain; this water can carry contaminants, and porous materials it soaks are often discarded rather than dried.
  • Rain and runoff enter through roofs, windows, cellar doors, and foundation walls.
  • Plumbing failures release clean water that still needs prompt drying.

During a water damage mold inspection, we document where water appears to have entered, take moisture readings, and sample where useful, so owners can choose the right contractor for repairs or cleanup.

Humidity Near the Water

The U.S. Environmental Protection Agency recommends keeping indoor relative humidity below 60 percent, ideally between 30 and 50 percent. Near the waterfront, summer humidity often runs higher, especially in cellars and ground floors. A hygrometer, a dehumidifier, and exhaust fans that vent outdoors help keep conditions in range.

What Your Findings Include

When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps.

How the Inspection Works

We start with a phone call about your concerns, storm and repair history, and which areas to include. On site, we review the property with you, inspect, take moisture readings, photograph conditions, and collect samples according to the scope. Samples go to a laboratory, with turnaround based on the service level selected. When a written report is part of your service, it includes laboratory results, interpretation, observed conditions, and recommendations.

Preparing for Your Visit

  • Leave suspect areas uncleaned and unpainted.
  • Keep windows closed as usual before air sampling.
  • Clear access to the cellar, ground floor, and under-sink cabinets.
  • Gather records of flooding, repairs, and renovations.

Red Hook Mold Testing FAQ

Our building flooded in Sandy. Should we test now?

If you notice odors, staining, or dampness, or you are buying, selling, or leasing, an inspection with moisture readings can clarify current conditions.

Do you inspect warehouses and studios?

Yes. We provide commercial mold inspection for industrial, studio, and retail spaces.

Do you remove mold?

No. We provide independent inspection and testing only.

Which nearby areas do you serve?

Carroll Gardens, Cobble Hill, Gowanus, Sunset Park, and all of Brooklyn.

Related Pages

See our Carroll Gardens, Cobble Hill, and Brooklyn pages, plus our mold testing and mold inspection services.

Schedule Mold Testing in Red Hook, Brooklyn, NY

For an independent mold inspector in Red Hook, Brooklyn, NY, contact Prime Environmental NY.

Prime Environmental NY

Phone: (917) 723-2297

Email: primeenvironmentalny@gmail.com

Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)

Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.