Mold Testing & Mold Inspection in Soundview, Bronx, NY

Mold Testing and Mold Inspection in Soundview, Bronx

Soundview is a neighborhood on the Clason Point peninsula in the south-central Bronx. It is bounded by the Cross Bronx Expressway on the north, White Plains Road on the east, Lacombe Avenue on the south, and the Bronx River on the west, with the Bruckner Expressway running through its middle. Soundview is part of Bronx Community District 9 and is served by ZIP codes 10472 (north of the Bruckner) and 10473 (south of it). NYC Ferry’s Soundview route has served the neighborhood since 2018.

Prime Environmental NY provides independent mold testing in Soundview and professional mold inspection for houses, apartments, co-ops, condominiums, rental buildings, and commercial spaces. We inspect and test only. We do not perform mold removal or remediation, so our findings are independent of any cleanup work.

Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule.

A Mostly Residential Neighborhood

Soundview is mostly residential, with rowhouses, semi-detached and detached homes, and apartment buildings ranging from prewar to mid-century and modern construction. Most buildings contain more than one unit. The neighborhood also has nine NYCHA developments, including the Soundview Houses, Bronx River Houses, Monroe Houses, Sotomayor Houses, and Clason Point Gardens.

Soundview Park, about 205 acres in the southwest of the neighborhood, was created on land filled starting in 1939, where tidal marsh and open water once met the Bronx River estuary. The Clason Point peninsula as a whole is bounded by the Bronx River, the East River, and Westchester Creek.

Moisture in Soundview Houses

Basements

Basements in Bronx houses typically hold the boiler, water heater, laundry, and storage, and many have been finished as living space. Foundation seepage after heavy rain, leaking supply lines, sump or floor-drain backups, and condensation on cool walls and pipes are the usual moisture sources. Finished walls, carpet, and paneling can hide dampness until odors appear.

Attics and Roofs

Roof leaks, poor attic ventilation, and bathroom exhaust fans that vent into the attic can lead to moisture on roof sheathing and rafters. Attic mold testing makes sense after a roof leak or when stains appear on top-floor ceilings.

Attached and Semi-Detached Houses

Shared walls and roof lines mean a leak next door can affect your side. Stains along a party wall or at the ceiling line near the shared roof are worth investigating.

Bathrooms, Kitchens, and Laundry Areas

Slow leaks under sinks, behind toilets, and around tubs, along with washing machine hoses and dishwasher connections, are common sources of hidden moisture.

Moisture in Apartment Buildings

Leaks Between Stacked Apartments

In apartment buildings, kitchens and bathrooms are stacked along shared plumbing risers. A leak from an upstairs tub, toilet, or sink can show up in the unit below as a ceiling stain, bubbling paint, or soft plaster. Our findings note when evidence suggests moisture is coming from another unit or a building system.

Steam Heat and Winter Condensation

Many older Bronx apartment buildings are heated by steam. Leaking radiator valves, cooking, showers, and closed windows raise indoor humidity in winter, and condensation collects on window frames, exterior corners, and closets on outside walls.

Roofs and Top-Floor Units

Flat roofs, parapets, and roof drains are common leak points. Top-floor apartments often see the first signs after heavy rain.

Basements and Building Cellars

Building basements hold boilers, laundry rooms, and storage, and they can stay damp from foundation seepage, plumbing leaks, and humidity.

Low-Lying Land Near the Water

The southern part of the Clason Point peninsula sits close to the East River and the Bronx River estuary. Low-lying properties near the water can face higher humidity and, during severe storms, the possibility of coastal or stormwater flooding. Basements and ground-floor units that have taken on water before deserve a closer look at materials that were wet and later covered.

Mold Testing Services

Professional Mold Inspection

A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.

Moisture Investigation

Moisture readings and observations focused on plumbing leaks, roof leaks, window leaks, condensation, humidity, and water intrusion.

Mold Air Sampling and Mold Spore Testing

Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.

Mold Surface Sampling

Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the reliable answer to black mold testing questions.

Indoor Air Quality Testing

Mold-focused indoor air quality testing pairing air sampling with inspection findings.

Post-Remediation Mold Verification

After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.

Residential Mold Testing in Soundview

Typical reasons people call:

  • A ceiling stain or leak from the apartment above
  • Recurring growth in a bathroom with limited ventilation
  • Condensation and dark spotting around windows in winter
  • A musty odor in a closet or bedroom on an exterior wall
  • A damp basement in a rowhouse or two-family house
  • A landlord evaluating a rental unit between tenants
  • Documentation for a landlord, managing agent, or co-op or condo board
  • Independent post-remediation verification after another contractor’s work

New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other. Tenants should notify their landlord and can call 311 if the problem is not addressed.

Public Housing Residents

NYCHA residents generally report repairs, including mold and leaks, directly to NYCHA. If you live in public housing and want independent documentation of conditions in your apartment, you can hire us to inspect the areas you can give us access to; we report what we observe and what the laboratory finds.

Commercial Mold Inspection

Stores, restaurants, and offices along Westchester Avenue and the neighborhood’s other commercial streets deal with plumbing leaks, kitchen humidity, and storage areas. We define the scope with the owner or manager and document why each sample was collected.

Black Mold Testing

Color does not identify a mold type. Mold surface sampling lets the laboratory identify what is growing on a material, and mold air sampling shows what is airborne and how indoor air compares with outdoor air when an outdoor comparison sample can be collected.

What Your Findings Include

When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps, such as asking management to repair a riser, roof, or window, improving ventilation, or engaging a qualified remediation contractor.

How to Prepare for Your Mold Inspection

  • Leave suspect areas as they are. Cleaning, bleaching, or painting over a stain can remove what a surface sample needs to capture.
  • Keep normal conditions before air sampling. Avoid running air purifiers or airing out the space right before the visit.
  • Make key areas reachable. Clear access to under-sink cabinets, closets on exterior walls, window areas, and the basement or boiler room if they are in scope.
  • Gather the history. Dates of leaks, repairs, renovations, and any earlier testing reports help focus moisture readings and sampling.
  • Arrange access to shared spaces. If the suspected source is in a neighbor’s unit or a building area, let us know who controls access.

NYS Licensed Mold Assessment

Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:

  • Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
  • Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)

Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.

Soundview Mold Testing FAQ

Can a tenant hire you directly?

Yes. Tenants can hire us to inspect the areas of their apartment they can give us access to. We document conditions; we do not make legal determinations.

Do you cover Clason Point?

Yes. We serve all of the Clason Point peninsula, including Soundview and Clason Point.

Do you remove mold?

No. We inspect and test only. If remediation is needed, a separate contractor should do it, and we can return for post-remediation verification.

Do you serve nearby neighborhoods?

Yes, including Castle Hill, Parkchester, Hunts Point, and all of the Bronx.

Schedule Mold Testing in Soundview

For an independent mold inspector in Soundview, contact Prime Environmental NY.

Prime Environmental NY

Phone: (917) 723-2297

Email: primeenvironmentalny@gmail.com

Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)

Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.