Mold Testing & Mold Inspection in St. George, Staten Island, NY

Mold Testing and Mold Inspection in St. George, Staten Island

St. George sits at the northeastern tip of Staten Island, where the Kill Van Kull meets Upper New York Bay, with Tompkinsville to the south and New Brighton to the west. It is home to the St. George Terminal of the Staten Island Ferry and the Staten Island Railway, and to Staten Island Borough Hall, built in 1906. St. George is part of Staten Island Community District 1 and is served by ZIP code 10301.

Prime Environmental NY provides independent mold testing in St. George and professional mold inspection for houses, apartments, co-ops, condominiums, rental buildings, and commercial spaces. We inspect and test only. We do not perform mold removal or remediation, so our findings are independent of any cleanup work.

Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule.

Victorian Houses on Steep Hills

Away from the waterfront, St. George’s residential streets climb steep hills with winding roads, including Fort Hill overlooking the harbor. The St. George Historic District, designated by the Landmarks Preservation Commission in 1994, includes 78 houses and St. Peter’s Church. The neighborhood’s housing includes:

  • Victorian-era houses in Queen Anne, Shingle, Colonial Revival, and Tudor styles.
  • Greek Revival houses near the waterfront.
  • Second Empire duplexes.
  • Art Deco apartment buildings.
  • High-rise apartments, including the 20-story Castleton Park Apartments, among the tallest buildings on Staten Island.

Moisture Concerns in St. George’s Older Houses

Hillside Foundations

Houses built on steep lots often have one side of the basement below grade and the other partly exposed. Water from rain and snowmelt runs downhill against the uphill foundation wall, which is where dampness, efflorescence, and musty odors tend to appear first.

Complex Victorian Roofs

Turrets, dormers, valleys, chimneys, and porches give Victorian houses their character, and each one is a place where flashing can fail. Stains on top-floor ceilings, in attics, and on walls below chimneys are worth investigating.

Wood Siding, Porches, and Trim

Wood shingles, clapboard, and porch framing can let water reach wall cavities when paint, caulk, or flashing deteriorate. Porch roofs that tie into the main wall are common leak points.

Crawl Spaces and Older Basements

Older houses may have stone or brick foundations, partial basements, and crawl spaces. Where a crawl space can be safely accessed, we document conditions and sample as appropriate.

Moisture in Apartment Buildings

Leaks Between Stacked Apartments

In apartment buildings, kitchens and bathrooms are stacked along shared plumbing risers. A leak from an upstairs tub, toilet, or sink can show up in the unit below as a ceiling stain, bubbling paint, or soft plaster. Our findings note when evidence suggests moisture is coming from another unit or a building system.

Steam Heat and Winter Condensation

Many older Bronx apartment buildings are heated by steam. Leaking radiator valves, cooking, showers, and closed windows raise indoor humidity in winter, and condensation collects on window frames, exterior corners, and closets on outside walls.

Roofs and Top-Floor Units

Flat roofs, parapets, and roof drains are common leak points. Top-floor apartments often see the first signs after heavy rain.

Basements and Building Cellars

Building basements hold boilers, laundry rooms, and storage, and they can stay damp from foundation seepage, plumbing leaks, and humidity.

Mold Testing Services

Professional Mold Inspection

A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.

Moisture Investigation

Moisture readings and observations focused on plumbing leaks, roof leaks, window leaks, condensation, humidity, and water intrusion.

Mold Air Sampling and Mold Spore Testing

Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.

Mold Surface Sampling

Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the reliable answer to black mold testing questions.

Indoor Air Quality Testing

Mold-focused indoor air quality testing pairing air sampling with inspection findings.

Post-Remediation Mold Verification

After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.

Residential Mold Testing in St. George

Typical reasons people call:

  • A damp basement on the uphill side of a hillside house
  • A stain below a roof valley, dormer, or chimney
  • Attic dampness after a roof leak
  • A leak from the unit above in an apartment building
  • Condensation and growth around windows in winter
  • A pre-purchase evaluation of a Victorian house or apartment
  • Independent post-remediation verification

New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other. Tenants should notify their landlord and can call 311 if the problem is not addressed.

Commercial Mold Inspection

Offices, stores, and restaurants near the ferry terminal, Borough Hall, and Empire Outlets deal with plumbing leaks, HVAC condensate, kitchen humidity, and storage areas. We define the scope with the owner or manager and document why each sample was collected.

Black Mold Testing

Color does not identify a mold type. Mold surface sampling lets the laboratory identify what is growing on a material, and mold air sampling shows what is airborne and how indoor air compares with outdoor air when an outdoor comparison sample can be collected.

What Your Findings Include

When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps, such as asking management to repair a riser, roof, or window, improving ventilation, or engaging a qualified remediation contractor.

How to Prepare for Your Mold Inspection

  • Leave suspect areas as they are. Cleaning, bleaching, or painting over a stain can remove what a surface sample needs to capture.
  • Keep normal conditions before air sampling. Avoid running air purifiers or airing out the space right before the visit.
  • Make key areas reachable. Clear access to under-sink cabinets, closets on exterior walls, window areas, and the basement or boiler room if they are in scope.
  • Gather the history. Dates of leaks, repairs, renovations, and any earlier testing reports help focus moisture readings and sampling.
  • Arrange access to shared spaces. If the suspected source is in a neighbor’s unit or a building area, let us know who controls access.

NYS Licensed Mold Assessment

Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:

  • Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
  • Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)

Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.

St. George Mold Testing FAQ

Can you inspect a landmarked Victorian house?

Yes. Our inspections are non-destructive. We inspect accessible areas, take moisture readings, and sample where helpful, without opening walls or removing historic materials.

Can you inspect an attic and crawl space?

Yes, where they can be safely accessed. If an area is not accessible, our findings will note that limitation.

Do you remove mold?

No. We inspect and test only. If remediation is needed, a separate contractor should do it, and we can return for post-remediation verification.

Do you serve nearby neighborhoods?

Yes, including Tompkinsville, New Brighton, Stapleton, and all of Staten Island.

Schedule Mold Testing in St. George

For an independent mold inspector in St. George, contact Prime Environmental NY.

Prime Environmental NY

Phone: (917) 723-2297

Email: primeenvironmentalny@gmail.com

Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)

Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.