Mold Testing and Mold Inspection in Travis, Staten Island
Travis is a small neighborhood on Staten Island’s West Shore, bounded by Meredith Avenue and Victory Boulevard on the north, the William T. Davis Wildlife Refuge on the east, Fresh Kills on the south, and the Arthur Kill on the west. The 2020 Census counted 42,871 residents in the larger New Springville–Willowbrook–Bulls Head–Travis area.
Prime Environmental NY provides independent mold testing in Travis and professional mold inspection for houses, apartments, co-ops, condominiums, rental buildings, and commercial spaces. We inspect and test only. We do not perform mold removal or remediation, so our findings are independent of any cleanup work.
Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule.
Linoleumville and an Independence Day Tradition
Travis has had many names: Jersey Wharf, New Blazing Star Ferry, Travisville, Long Neck, and Deckertown. In 1873, the American Linoleum Company bought about 300 acres here to build the nation’s first linoleum factory, and the community became known as Linoleumville. When the plant closed in 1931, residents chose the name Travis. The neighborhood’s annual Independence Day parade has been held since 1911.
Today, older homes on large lots are gradually being replaced by newer row homes. Commercial development lines the West Shore Expressway, and the Teleport office and industrial park sits at the neighborhood’s eastern edge.
Water on Three Sides
Travis is bordered by water and wetlands: the Arthur Kill on the west, Fresh Kills on the south, and the William T. Davis Wildlife Refuge on the east. Properties on lower ground near these areas can see higher humidity and wetter soils, and in severe storms, flooding is possible. Basements, crawl spaces, and lower levels are the first places to check for dampness after heavy rain.
Where Moisture Shows Up in Travis Homes
Older Houses
Older houses may have stone or block foundations, crawl spaces, and roofs and siding that have been repaired over decades. Foundation seepage, roof leaks, and deteriorated siding or trim are common moisture sources.
Newer Row Homes
In newer row homes, shared walls and roof lines mean a leak next door can show up on your side. Tighter, more airtight construction also means moisture from showers, cooking, and laundry needs working exhaust fans that vent outdoors.
Basements and Finished Lower Levels
Basements in Staten Island houses commonly hold the boiler, water heater, laundry, and storage, and many have been finished as family rooms or living space. Foundation seepage after heavy rain, sump and floor-drain problems, plumbing leaks, and condensation on cool walls and pipes are the usual moisture sources. Carpet, drywall, and paneling can hide dampness until odors appear.
Attics and Roofs
Roof leaks, inadequate ventilation, and bathroom or kitchen exhaust fans that vent into the attic can lead to moisture on roof sheathing and rafters. Attic mold testing makes sense after a roof leak or when stains appear on top-floor ceilings.
Crawl Spaces
Some houses sit partly or fully over crawl spaces, which can trap humid air and are rarely visited. Where a crawl space can be safely accessed, we document conditions and collect surface samples as appropriate.
Bathrooms, Kitchens, and Laundry Areas
Slow leaks under sinks, behind toilets, and around tubs, along with washing machine hoses and dishwasher connections, are common sources of hidden moisture.
Mold Testing Services
Professional Mold Inspection
A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.
Moisture Investigation
Moisture readings and observations focused on plumbing leaks, roof leaks, window leaks, condensation, humidity, and water intrusion.
Mold Air Sampling and Mold Spore Testing
Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.
Mold Surface Sampling
Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the reliable answer to black mold testing questions.
Indoor Air Quality Testing
Mold-focused indoor air quality testing pairing air sampling with inspection findings.
Post-Remediation Mold Verification
After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.
Residential Mold Testing in Travis
Typical reasons homeowners and renters call:
- A damp or musty basement after heavy rain
- A stain on a top-floor ceiling or in the attic after a roof leak
- Recurring growth in a bathroom or around windows in winter
- A musty odor with no visible source
- A landlord evaluating a rental unit between tenants
- A pre-purchase evaluation before closing
- Independent post-remediation verification after another contractor’s work
Buying or Selling a Home in Travis
When a home inspection notes water staining, efflorescence, or musty odors, buyers often want more information before closing. A pre-purchase mold inspection documents accessible conditions and, where useful, collects samples for laboratory analysis. Sellers also use independent mold assessment to understand conditions before listing. We report findings; we do not estimate repair costs or recommend specific remediation companies.
Commercial Mold Inspection
Offices, warehouses, and commercial buildings along the West Shore Expressway and in the Teleport area deal with roof leaks on large flat roofs, plumbing leaks, HVAC condensate, and storage areas. We define the scope with the owner or manager and document why each sample was collected.
Black Mold Testing
Color does not identify a mold type. Mold surface sampling lets the laboratory identify what is growing on a material, and mold air sampling shows what is airborne and how indoor air compares with outdoor air when an outdoor comparison sample can be collected.
What Your Findings Include
When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps, such as asking management to repair a riser, roof, or window, improving ventilation, or engaging a qualified remediation contractor.
How to Prepare for Your Mold Inspection
- Leave suspect areas as they are. Cleaning, bleaching, or painting over a stain can remove what a surface sample needs to capture.
- Keep normal conditions before air sampling. Avoid running air purifiers or airing out the space right before the visit.
- Make key areas reachable. Clear access to under-sink cabinets, closets on exterior walls, window areas, and the basement or boiler room if they are in scope.
- Gather the history. Dates of leaks, repairs, renovations, and any earlier testing reports help focus moisture readings and sampling.
- Arrange access to shared spaces. If the suspected source is in a neighbor’s unit or a building area, let us know who controls access.
NYS Licensed Mold Assessment
Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:
- Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
- Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)
Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.
Travis Mold Testing FAQ
I live near the wetlands. Does that mean my house has mold?
No. Living near wetlands does not mean a house has mold. If you have noticed dampness, odors, staining, or past water damage, an inspection with moisture readings can help determine whether current conditions are a concern.
Can you inspect a newer row home?
Yes. We inspect the accessible areas of your home included in the agreed scope and note when conditions suggest moisture is coming from a neighboring unit or shared roof.
Do you remove mold?
No. We inspect and test only. If remediation is needed, a separate contractor should do it, and we can return for post-remediation verification.
Do you serve nearby neighborhoods?
Yes, including Bloomfield, Bulls Head, New Springville, and all of Staten Island.
Schedule Mold Testing in Travis
For an independent mold inspector in Travis, contact Prime Environmental NY.
Prime Environmental NY
Phone: (917) 723-2297
Email: primeenvironmentalny@gmail.com
Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)
Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.