Mold Testing & Mold Inspection in Sunset Park, Brooklyn, NY

Sunset Park Mold Testing and Mold Inspection

Sunset Park stretches from the hilltop park that gives it its name down to New York Harbor. Mostly two-story rowhouses built between about 1892 and 1910 line its side streets, constructed during a building boom that followed the elevated and subway lines. In June 2019, the Landmarks Preservation Commission designated four historic districts here, including Sunset Park South with more than 280 rowhouses. Along the waterfront, Industry City, formerly Bush Terminal, occupies warehouses between 32nd and 51st Streets. Fifth Avenue is a major commercial street, and Eighth Avenue anchors Brooklyn’s first Chinatown. The 2010 Census counted 126,381 residents, according to figures reported for the neighborhood.

Prime Environmental NY provides independent mold testing in Sunset Park, Brooklyn and professional mold inspection for rowhouse owners, tenants, landlords, buyers, and commercial and industrial tenants. We inspect, sample, and report. We do not perform mold remediation, removal, or construction.

Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule mold testing in Sunset Park.

Sunset Park at a Glance

  • Boundaries: the Prospect Expressway and Park Slope to the north, Ninth Avenue and Borough Park to the east, 65th Street and Bay Ridge to the south, and New York Harbor to the west
  • Community district: Brooklyn Community District 7
  • ZIP codes: 11220 and 11232
  • Historic districts: four districts designated in June 2019
  • Commercial streets: Fifth Avenue and Eighth Avenue
  • Park: Sunset Park, about 24.5 acres between Fifth and Seventh Avenues from 41st to 44th Streets

Two-Story Rowhouses: Common Moisture Patterns

Sunset Park’s rowhouses are now well over a century old, and many have been divided into two or more apartments. Common moisture patterns in these homes include:

  • Flat roofs and parapets that leak into upper-floor ceilings after storms
  • Shared roof seams and party walls, where a neighbor’s leak can affect your home
  • Brick and brownstone façades with eroded mortar that let wind-driven rain reach interior plaster
  • Basements and cellars that take on water after heavy rain, especially on the sloping streets that run downhill toward the harbor
  • Upstairs kitchens and bathrooms in converted layouts that leak into the apartment below
  • Busy households where cooking, showers, and laundry raise indoor humidity

Living on the Hill

Sunset Park’s streets slope from the high ground around the park down to the waterfront. Homes lower on the slope may receive runoff from above, and basements on the downhill side are more likely to show dampness. We take the slope and drainage into account when evaluating where moisture is coming from.

Industrial and Commercial Mold Inspection on the Waterfront

The Sunset Park waterfront, including Industry City and the former Bush Terminal, is home to manufacturing, warehousing, studios, offices, food production, and retail in large, older industrial buildings. Moisture risks in these buildings include large flat roofs and roof drains, aging windows, freight areas, below-grade spaces, and stored goods such as paper, cardboard, textiles, and wood. Our commercial mold inspection documents conditions in the areas the tenant or facility manager selects and explains every sample location.

Commercial Mold Inspection on Fifth and Eighth Avenues

Restaurants, bakeries, groceries, and shops along Fifth and Eighth Avenues often have basements used for storage, commercial kitchens, walk-in coolers, and apartments above. These are common places for moisture problems, and our inspection is tailored to each business.

Mold Testing Services

Professional Mold Inspection

A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.

Moisture Investigation

Moisture readings and observations focused on plumbing leaks, roof leaks, flooding, condensation, humidity, and water intrusion.

Mold Air Sampling and Mold Spore Testing

Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.

Mold Surface Sampling

Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is how black mold testing gets a definitive answer.

Indoor Air Quality Testing

Mold-focused indoor air quality testing pairing air sampling with inspection findings.

Post-Remediation Mold Verification

After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.

Tenants and Landlords

New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. Tenants should notify their landlord and can call 311 if the problem is not addressed. Tenants can hire us to evaluate areas they can access.

NYS Licensed Mold Assessment

Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:

  • Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
  • Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)

Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.

Historic District Considerations

Exterior work on buildings within Sunset Park’s designated historic districts generally requires Landmarks Preservation Commission review. When a moisture problem involves a façade, cornice, window, or roof, documentation of where water appears to enter can help owners plan the right repair.

Protecting Stored Goods in Older Industrial Buildings

For businesses in Sunset Park’s waterfront buildings, mold often shows up first on inventory, packaging, and records rather than on walls. Practical steps include keeping goods on pallets or shelving off the floor and away from exterior walls, watching ceilings below roof drains after storms, keeping freight doors closed during rain and very humid weather, using dehumidification in enclosed storage rooms, and responding quickly to any leak by moving affected materials and drying the area. When staining, odors, or damaged inventory suggest a problem, a commercial mold inspection with moisture readings and targeted sampling can help define the scope and likely cause.

Understanding Air Sampling Results

Mold spores are always present outdoors, so indoor results are compared with an outdoor sample collected at the same time. Indoor totals well above outdoor levels, or spore types rare outdoors, can point to an indoor source. Interpretation always considers what we observed and measured during the inspection.

What Your Findings Include

When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps.

How the Inspection Works

We start with a phone call about your concerns and which areas to include. On site, we review the property’s history with you, inspect, take moisture readings, photograph conditions, and collect samples according to the scope. Samples go to a laboratory, with turnaround based on the service level selected. When a written report is part of your service, it includes laboratory results, interpretation, observed conditions, and recommendations.

Preparing for Your Visit

  • Leave suspect areas uncleaned and unpainted.
  • Keep windows closed as usual before air sampling.
  • Clear access to the basement, roof hatch if safe, and under-sink cabinets.
  • Gather dates of leaks, roof work, and renovations.

Signs Worth a Professional Look

  • A musty smell in the basement or a bedroom
  • Top-floor ceiling stains after storms
  • Bubbling paint or efflorescence on front or rear walls
  • Spotting around windows during winter
  • Musty or damaged stored goods in a commercial space

Sunset Park Mold Testing FAQ

Do you inspect rowhouses divided into apartments?

Yes. We inspect the units and common areas you can provide access to.

Can you inspect industrial and warehouse spaces?

Yes. We provide commercial mold inspection for industrial, warehouse, studio, and office spaces.

Do you remove mold?

No. We provide independent inspection and testing only.

Which nearby areas do you serve?

Park Slope, Bay Ridge, Borough Park, Windsor Terrace, and all of Brooklyn.

Related Pages

See our Park Slope, Bay Ridge, Borough Park, and Brooklyn pages, plus our mold testing and mold inspection services.

Schedule Mold Testing in Sunset Park, Brooklyn, NY

For an independent mold inspector in Sunset Park, Brooklyn, NY, contact Prime Environmental NY.

Prime Environmental NY

Phone: (917) 723-2297

Email: primeenvironmentalny@gmail.com

Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)

Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.