Clinton Hill Mold Testing for Mansions, Brownstones, and Apartments
Clinton Hill’s history runs from Dutch tobacco plantations in the 1640s to the Gilded Age. Clinton Avenue became a boulevard in 1832, and later in the 19th century oil industrialist Charles Pratt built a mansion at 232 Clinton Avenue, gave houses nearby to his sons, and founded Pratt Institute in 1887. Today the neighborhood’s housing ranges from those grand mansions to brownstones, brick rowhouses, and apartment buildings. The Clinton Hill Historic District was listed on the National Register of Historic Places in 1985.
Prime Environmental NY provides independent mold testing in Clinton Hill, Brooklyn and professional mold inspection for homeowners, co-op and condo owners, renters, institutions, buyers, and businesses. We inspect, sample, and report. We do not perform mold remediation or removal.
Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule mold testing in Clinton Hill.
Clinton Hill at a Glance
- Boundaries: the Brooklyn Navy Yard and Flushing Avenue to the north, Williamsburg to the northeast, Classon Avenue and Bedford-Stuyvesant to the east, Atlantic Avenue and Prospect Heights to the south, and Vanderbilt Avenue and Fort Greene to the west
- Community district: Brooklyn Community District 2
- ZIP codes: 11205 and 11238
- Landmarks: Clinton Avenue’s mansions and Pratt Institute
- Historic district: Clinton Hill Historic District, listed on the National Register in 1985
Mansions and Large Historic Homes
Clinton Hill’s 19th-century mansions are large, complex buildings; Charles Pratt’s own mansion is now part of a college campus, and others have been divided, converted, or restored over the years. Large historic buildings have many places where moisture can enter and many rooms where it can go unnoticed:
- Complex roofs with slate or other historic materials, multiple chimneys, and large skylights
- Masonry walls of brick or stone, sometimes with ornamental details that trap water
- Large basements with old foundations, boilers, and plumbing
- Many bathrooms, often added during conversions
- Rarely used rooms, where leaks and humidity build unnoticed
Brownstones and Rowhouses
Clinton Hill’s brownstones and brick rowhouses share familiar patterns: garden levels and cellars that take on water through foundation walls and areaways, façades that let wind-driven rain reach plaster, flat roofs and cornices that leak into top floors, and party walls that carry moisture from neighbors.
Apartment Buildings and Student Housing
Apartment buildings throughout the neighborhood, including those near Pratt Institute, bring leaks between units, riser leaks, roof leaks in top-floor apartments, and winter condensation. Renters can hire us to inspect the areas they can access. New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in.
Mold Testing Services
Professional Mold Inspection
A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.
Moisture Investigation
Moisture readings and observations focused on plumbing leaks, roof leaks, façade leaks, condensation, humidity, and water intrusion.
Mold Air Sampling and Mold Spore Testing
Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.
Mold Surface Sampling
Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is how black mold testing gets a definitive answer.
Basement Mold Inspection and Attic Mold Testing
Inspection and sampling in accessible cellars, basements, and attic spaces.
Indoor Air Quality Testing
Mold-focused indoor air quality testing pairing air sampling with inspection findings.
Post-Remediation Mold Verification
After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.
Commercial and Institutional Mold Inspection
Restaurants, cafés, shops, galleries, schools, and religious and institutional buildings in Clinton Hill often occupy older structures with large basements and complex roofs. Commercial mold inspection is tailored to the building and the areas of concern, with clear documentation of conditions and sampling locations.
NYS Licensed Mold Assessment
Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:
- Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
- Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)
Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.
Interpreting Results in Large Historic Buildings
In a large building, one air sample describes only the area where it was collected. We choose sampling locations based on the inspection, often including an affected area, an unaffected comparison area, and an outdoor sample collected at the same time when conditions allow. Older buildings with open stairwells and drafty windows can show indoor results close to outdoor levels even when a localized problem exists, so surface sampling and moisture readings remain important.
Converted Buildings and Hidden Plumbing
When a large house is divided into apartments or adapted for a school or institution, new bathrooms, kitchens, and laundry areas are often added where the original design never anticipated plumbing. Supply and drain lines may run through old walls, ceilings, and floors, and connections between new and old piping can leak slowly for a long time before staining appears. During an inspection, we pay particular attention to ceilings and walls below converted wet areas, to closets and chases that hide piping, and to the joints between original construction and later additions. Moisture readings help find damp areas before they become visible problems.
Air Sampling or Surface Sampling?
- Visible staining: a swab or tape-lift surface sample identifies what is growing on that material.
- Odor without visible growth: mold air sampling indoors, compared with an outdoor sample collected at the same time, shows whether indoor air appears different.
- Recurring growth: a moisture investigation identifies the source.
- After cleanup: post-remediation verification combines a visual inspection with appropriate sampling.
What Your Findings Include
When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps.
How the Inspection Works
We start with a phone call about your concerns and which areas to include, and we confirm access requirements for multi-unit and institutional buildings. On site, we inspect, take moisture readings, photograph conditions, and collect samples according to the scope. Samples go to a laboratory, with turnaround based on the service level selected. When a written report is part of your service, it includes laboratory results, interpretation, observed conditions, and recommendations.
Preparing for Your Visit
- Leave suspect areas uncleaned and unpainted.
- Keep windows closed as usual before air sampling.
- Clear access to cellars, attic hatches, closets, and under-sink cabinets.
- Gather records of leaks, roof and façade work, and renovations.
Signs Worth a Professional Look
- A musty smell in a cellar, garden level, or closet
- Bubbling paint or efflorescence on masonry walls
- Stains on top-floor ceilings or around chimneys and skylights
- Spotting around windows during winter
- A leak that was not dried quickly
Clinton Hill Mold Testing FAQ
Do you inspect large historic homes?
Yes. We tailor the scope to the size of the building and the areas of concern.
Can I hire you as a renter or student?
Yes. You can hire us to evaluate areas you can access.
Do you remove mold?
No. We provide independent inspection and testing only.
Which nearby areas do you serve?
Fort Greene, Bedford-Stuyvesant, Prospect Heights, Williamsburg, and all of Brooklyn.
Related Pages
See our Fort Greene, Bedford-Stuyvesant, and Brooklyn pages, plus our mold testing and mold inspection services.
Schedule Mold Testing in Clinton Hill, Brooklyn, NY
For an independent mold inspector in Clinton Hill, Brooklyn, NY, contact Prime Environmental NY.
Prime Environmental NY
Phone: (917) 723-2297
Email: primeenvironmentalny@gmail.com
Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)
Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.