Mold Testing and Mold Inspection in the Concourse Area, Bronx
The Concourse neighborhood stretches along the Grand Concourse in the west Bronx, bounded by East 169th Street on the north, Webster Avenue on the east, East 149th Street on the south, and Jerome Avenue and the Harlem River on the west. It includes the subsections of West Concourse, East Concourse, and Concourse Village. The neighborhood is part of Bronx Community District 4 and is served by ZIP codes 10451, 10452, and 10456.
Prime Environmental NY provides independent mold testing in the Concourse area and professional mold inspection for houses, apartments, co-ops, condominiums, rental buildings, and commercial spaces. We inspect and test only. We do not perform mold removal or remediation, so our findings are independent of any cleanup work.
Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule.
The Bronx’s Grand Boulevard
The Grand Concourse was built by New York City in the early 1900s, alongside the expansion of the subway, and was modeled on the Champs-Élysées in Paris. Along and around it rose five- and six-story apartment buildings in the 1920s and 1930s, many in Art Deco and Art Moderne styles, along with Tudor, Renaissance, and Colonial Revival designs. The Landmarks Preservation Commission designated the Grand Concourse Historic District in 2011. The neighborhood is also home to the Bronx County Courthouse at 161st Street and to Yankee Stadium, whose current ballpark opened in 2009.
Prewar Apartment Buildings and Their Moisture Problems
Almost a century old, the Concourse’s apartment buildings share moisture issues common to large prewar buildings:
Leaks Between Stacked Apartments
In apartment buildings, kitchens and bathrooms are stacked along shared plumbing risers. A leak from an upstairs tub, toilet, or sink can show up in the unit below as a ceiling stain, bubbling paint, or soft plaster. Our findings note when evidence suggests moisture is coming from another unit or a building system.
Steam Heat and Winter Condensation
Many older Bronx apartment buildings are heated by steam. Leaking radiator valves, cooking, showers, and closed windows raise indoor humidity in winter, and condensation collects on window frames, exterior corners, and closets on outside walls.
Roofs and Top-Floor Units
Flat roofs, parapets, and roof drains are common leak points. Top-floor apartments often see the first signs after heavy rain.
Basements and Building Cellars
Building basements hold boilers, laundry rooms, and storage, and they can stay damp from foundation seepage, plumbing leaks, and humidity.
Art Deco Details
Decorative brick, terra cotta, parapets, and corner casement windows give these buildings their character, but deteriorated joints, flashing, and window seals can also let water into walls. Interior staining near windows and on exterior corners, especially on upper floors, is worth investigating.
Interior Bathrooms and Courtyards
Many prewar layouts include bathrooms with small windows on courtyards or light shafts, and some interior bathrooms have no window at all. Without strong exhaust ventilation, shower moisture lingers, and recurring dark spotting on ceilings, caulk, and grout is common.
Mold Testing Services
Professional Mold Inspection
A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.
Moisture Investigation
Moisture readings and observations focused on plumbing leaks, roof leaks, window leaks, condensation, humidity, and water intrusion.
Mold Air Sampling and Mold Spore Testing
Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.
Mold Surface Sampling
Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the reliable answer to black mold testing questions.
Indoor Air Quality Testing
Mold-focused indoor air quality testing pairing air sampling with inspection findings.
Post-Remediation Mold Verification
After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.
Residential Mold Testing in the Concourse Area
Typical reasons people call:
- A ceiling stain or leak from the apartment above
- Recurring growth in a bathroom with limited ventilation
- Condensation and dark spotting around windows in winter
- A musty odor in a closet or bedroom on an exterior wall
- A landlord preparing a vacant unit for a new tenant
- Documentation for a landlord, managing agent, or co-op or condo board
- Independent post-remediation verification after another contractor’s work
New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other. Tenants should notify their landlord and can call 311 if the problem is not addressed.
Commercial Mold Inspection
Offices, stores, restaurants, and professional practices near the courthouse, along 161st Street, and along the Grand Concourse deal with plumbing leaks, HVAC condensate, kitchen humidity, and storage areas. We define the scope with the owner or manager and document why each sample was collected.
Black Mold Testing
Color does not identify a mold type. Mold surface sampling lets the laboratory identify what is growing on a material, and mold air sampling shows what is airborne and how indoor air compares with outdoor air when an outdoor comparison sample can be collected.
What Your Findings Include
When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps, such as asking management to repair a riser, roof, or window, improving ventilation, or engaging a qualified remediation contractor.
How to Prepare for Your Mold Inspection
- Leave suspect areas as they are. Cleaning, bleaching, or painting over a stain can remove what a surface sample needs to capture.
- Keep normal conditions before air sampling. Avoid running air purifiers or airing out the space right before the visit.
- Make key areas reachable. Clear access to under-sink cabinets, closets on exterior walls, window areas, and the basement or boiler room if they are in scope.
- Gather the history. Dates of leaks, repairs, renovations, and any earlier testing reports help focus moisture readings and sampling.
- Arrange access to shared spaces. If the suspected source is in a neighbor’s unit or a building area, let us know who controls access.
NYS Licensed Mold Assessment
Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:
- Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
- Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)
Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.
Concourse Mold Testing FAQ
Can a tenant in a large prewar building hire you?
Yes. Tenants can hire us to inspect the areas of their apartment they can give us access to. We document conditions; we do not make legal determinations.
Will an inspection disturb historic building features?
No. Our inspections are non-destructive. We do not open walls or remove finishes.
Do you remove mold?
No. We inspect and test only. If remediation is needed, a separate contractor should do it, and we can return for post-remediation verification.
Do you serve nearby neighborhoods?
Yes, including Highbridge, Melrose, Morrisania, Mott Haven, and all of the Bronx.
Schedule Mold Testing in the Concourse Area, Bronx
For an independent mold inspector in the Concourse Area, Bronx, contact Prime Environmental NY.
Prime Environmental NY
Phone: (917) 723-2297
Email: primeenvironmentalny@gmail.com
Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)
Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.