Mold Testing & Mold Inspection in Uniondale, NY

Mold Testing and Mold Inspection in Uniondale, NY

Uniondale is a hamlet in the Town of Hempstead in central Nassau County. The 2020 Census counted 32,473 residents. Uniondale is served by ZIP codes 11553, 11555, and 11556.

Prime Environmental NY provides independent mold testing in Uniondale and professional mold inspection for houses, condominiums, co-ops, rental properties, and commercial buildings. We inspect and test only. We do not perform mold removal or remediation, so our findings are independent of any cleanup work.

Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule an inspection at your property.

Coliseum, Colleges, and Offices

A one-room schoolhouse was built in Uniondale in 1830. Hofstra University was established on the William S. Hofstra estate in 1935, and today its north campus and part of its south campus are in Uniondale. The hamlet is also home to Nassau Veterans Memorial Coliseum, Nassau Community College, and major office buildings, including the U.S. headquarters of Lufthansa. A 1970s effort to incorporate Uniondale as a village failed.

Uniondale combines residential neighborhoods with one of Nassau County’s largest concentrations of office and institutional buildings.

Where Moisture Shows Up in Uniondale Homes

Postwar Houses

Houses built in the 1940s through 1960s are now well over half a century old. Original supply lines, drains, and water heaters may be reaching the end of their service life, and roofs, windows, and siding have often been replaced in stages. Slow plumbing leaks, roof leaks, and basement seepage are common sources of hidden moisture.

Multifamily Houses

In two-family houses, one unit often sits directly above another, with a shared basement. A leak upstairs can show up as a stain below, and basement dampness can affect the first-floor unit. Tenants can hire us to inspect the areas they can give us access to.

Basements and Finished Lower Levels

Basements in Long Island houses commonly hold the boiler, water heater, laundry, and storage, and many have been finished as family rooms or living space. Foundation seepage after heavy rain, sump and floor-drain problems, plumbing leaks, and condensation on cool walls and pipes are the usual moisture sources. Carpet, drywall, and paneling can hide dampness until odors appear.

Attics and Roofs

Roof leaks, inadequate ventilation, and bathroom or kitchen exhaust fans that vent into the attic can lead to moisture on roof sheathing and rafters. Attic mold testing makes sense after a roof leak or when stains appear on top-floor ceilings.

Crawl Spaces

Some houses sit partly or fully over crawl spaces, which can trap humid air and are rarely visited. Where a crawl space can be safely accessed, we document conditions and collect surface samples as appropriate.

Bathrooms, Kitchens, and Laundry Areas

Slow leaks under sinks, behind toilets, and around tubs, along with washing machine hoses and dishwasher connections, are common sources of hidden moisture.

Large Office and Institutional Buildings

Large commercial buildings have big flat roofs, extensive HVAC systems, and many restrooms, pantries, and mechanical rooms. Roof drain failures, condensate leaks, and plumbing leaks can wet ceiling tiles, drywall, and carpet across large areas before anyone notices.

Mold Testing Services

Professional Mold Inspection

A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.

Moisture Investigation

Moisture readings and observations focused on plumbing leaks, roof leaks, window leaks, condensation, humidity, and water intrusion.

Mold Air Sampling and Mold Spore Testing

Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.

Mold Surface Sampling

Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is the reliable answer to black mold testing questions.

Indoor Air Quality Testing

Mold-focused indoor air quality testing pairing air sampling with inspection findings.

Post-Remediation Mold Verification

After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.

Residential Mold Testing in Uniondale

Typical reasons homeowners and renters call:

  • A damp or musty basement after heavy rain
  • A stain on a top-floor ceiling or in the attic after a roof leak
  • Recurring growth in a bathroom or around windows in winter
  • A musty odor with no visible source
  • A landlord evaluating a rental unit between tenants
  • A pre-purchase evaluation before closing
  • Independent post-remediation verification after another contractor’s work

Buying or Selling a Home in Uniondale

When a home inspection notes water staining, efflorescence, or musty odors, buyers often want more information before closing. A pre-purchase mold inspection documents accessible conditions and, where useful, collects samples for laboratory analysis. Sellers also use independent mold assessment to understand conditions before listing. We report findings; we do not estimate repair costs or recommend specific remediation companies.

Commercial Mold Inspection

For Uniondale’s office towers and institutional buildings, we work with property managers and facility staff to define the scope, coordinate access, inspect ceilings, walls, HVAC-related areas, and below-grade spaces included in the scope, and collect samples where they help answer the question. Our findings explain why each sample was collected.

Black Mold Testing

Color does not identify a mold type. Mold surface sampling lets the laboratory identify what is growing on a material, and mold air sampling shows what is airborne and how indoor air compares with outdoor air when an outdoor comparison sample can be collected.

What Your Findings Include

When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps, such as asking management to repair a riser, roof, or window, improving ventilation, or engaging a qualified remediation contractor.

How to Prepare for Your Mold Inspection

  • Leave suspect areas as they are. Cleaning, bleaching, or painting over a stain can remove what a surface sample needs to capture.
  • Keep normal conditions before air sampling. Avoid running air purifiers or airing out the space right before the visit.
  • Make key areas reachable. Clear access to under-sink cabinets, closets on exterior walls, window areas, and the basement or boiler room if they are in scope.
  • Gather the history. Dates of leaks, repairs, renovations, and any earlier testing reports help focus moisture readings and sampling.
  • Arrange access to shared spaces. If the suspected source is in a neighbor’s unit or a building area, let us know who controls access.

NYS Licensed Mold Assessment

Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:

  • Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
  • Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)

Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.

Uniondale Mold Testing FAQ

Can you inspect an office suite?

Yes. We provide commercial mold inspection for offices and can coordinate access with building management.

Can a tenant hire you directly?

Yes. Tenants can hire us to inspect the areas they can give us access to. We do not make legal determinations.

Do you remove mold?

No. We inspect and test only. If remediation is needed, a separate contractor should do it, and we can return for post-remediation verification.

Do you serve nearby communities?

Yes, including Hempstead, East Meadow, Garden City, Roosevelt, and the rest of Long Island.

Schedule Mold Testing in Uniondale

For an independent mold inspector in Uniondale, contact Prime Environmental NY.

Prime Environmental NY

Phone: (917) 723-2297

Email: primeenvironmentalny@gmail.com

Long Island Address: 400 Kensington Ln, Bethpage, NY 11714 (inspections by appointment at your property)

Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.