Mold Testing & Mold Inspection in Kensington, Brooklyn, NY

Mold Testing in Kensington, Brooklyn

Kensington grew alongside Ocean Parkway. Development began in 1885, soon after the parkway was completed, and suburban villas and rows of townhouses followed in the 1890s and early 1900s, before Brooklyn joined New York City in 1898. Today prewar brick apartment buildings, many of them co-ops, line Ocean Parkway and Coney Island Avenue, while detached Victorian homes and brick rowhouses fill other blocks. Church Avenue is a main commercial street, along with Coney Island, Ditmas, and McDonald Avenues. The 2010 Census counted 36,891 residents in the Kensington–Ocean Parkway area, according to figures reported for the neighborhood.

Please note: this page covers Kensington in Brooklyn, not the village of Kensington on Long Island.

Prime Environmental NY provides independent mold testing in Kensington, Brooklyn and professional mold inspection for co-op shareholders, renters, homeowners, landlords, buyers, and businesses. We inspect, sample, and report. We do not perform mold remediation or removal.

Call (917) 723-2297 or email primeenvironmentalny@gmail.com to schedule mold testing in Kensington.

Kensington at a Glance

  • Approximate boundaries: Caton Avenue and Fort Hamilton Parkway to the north, 36th Street, Dahill Avenue, and 47th Street to the west, Foster Avenue to the south, and Coney Island Avenue to the east
  • Community boards: largely Brooklyn Community Board 12, with eastern tracts in Community Board 14
  • ZIP code: 11218
  • Housing: prewar co-op and rental apartment buildings, detached Victorian homes, and brick rowhouses
  • Commercial streets: Church Avenue, Coney Island Avenue, Ditmas Avenue, and McDonald Avenue

Prewar Co-ops on Ocean Parkway

The brick apartment buildings along Ocean Parkway and Coney Island Avenue have masonry walls, original or replacement windows, steam or hot-water heat, and plumbing risers serving stacks of kitchens and bathrooms. Common moisture questions include:

  • Leaks from the apartment above, especially under bathrooms and kitchens
  • Riser leaks affecting a vertical line of apartments
  • Roof and bulkhead leaks in top-floor units
  • Window leaks during wind-driven rain
  • Radiator valve and steam pipe leaks
  • Winter condensation on cold exterior walls and windows
  • Interior bathrooms with weak exhaust

Our professional mold inspection documents conditions inside your unit and notes when evidence suggests moisture is entering from another apartment or a building system. That gives shareholders, boards, and managing agents a shared factual starting point.

Victorian Homes and Rowhouses

Kensington’s detached Victorian homes have porches, complex roofs, wood siding, and basements; its brick rowhouses have flat roofs, party walls, and cellars. Both are well over a century old. Porch roof connections, valleys and chimneys, worn siding and trim, mortar joints, and basements after heavy rain are the most common places moisture enters.

Mold Testing Services

Professional Mold Inspection

A visual assessment of the accessible areas in your scope for suspected microbial growth, water damage, and conditions that support mold.

Moisture Investigation

Moisture readings and observations focused on plumbing leaks, roof leaks, flooding, condensation, humidity, and water intrusion.

Mold Air Sampling and Mold Spore Testing

Indoor air samples, with an outdoor comparison sample when conditions allow, analyzed by a laboratory that identifies and counts airborne fungal spores.

Mold Surface Sampling

Swab and tape-lift samples from suspect surfaces, sent for mold laboratory analysis. This is how black mold testing identifies what a stain actually is.

Basement Mold Inspection and Attic Mold Testing

Inspection and sampling in accessible cellars, basements, and attic spaces.

Indoor Air Quality Testing

Mold-focused indoor air quality testing pairing air sampling with inspection findings.

Post-Remediation Mold Verification

After remediation by a separate contractor, an independent visual inspection and appropriate sampling assess whether evaluated areas meet the applicable clearance criteria.

Tenants, Shareholders, and Local Law 55

New York City’s Department of Housing Preservation and Development (HPD) explains that under Local Law 55, owners of residential buildings with three or more apartments must keep units free of mold, inspect units annually for indoor allergen hazards, and make sure vacant units are free of mold before new tenants move in. In buildings with 10 or more units, HPD states that more than 10 square feet of mold must be handled by New York State licensed professionals, with the assessor and remediator independent of each other. Tenants should notify their landlord and can call 311 if the problem is not addressed.

Commercial Mold Inspection on Church Avenue

Restaurants, groceries, bakeries, and shops along Church Avenue and Coney Island Avenue often occupy older buildings with basements and apartments above. Commercial mold inspection focuses on basements and storage rooms, kitchens, walk-in coolers, restrooms, and ceilings below upper floors.

NYS Licensed Mold Assessment

Prime Environmental NY’s mold assessment work is performed under New York State Department of Labor licenses:

  • Mold Assessment Contractor License: 26-693HR-SHMO (issued to Prime Environmental NJ LLC)
  • Mold Assessor License: 26-69JDH-SHMO (individual license of Korab Ibrahimaj)

Both are listed in the state’s mold license records on data.ny.gov. New York does not allow one licensee to both assess and remediate a project, and we only assess and test.

Condensation or Leak?

Many co-op residents first notice mold in winter, along window frames and in exterior corners. Condensation-related growth tends to appear near the coldest surfaces and worsens in the coldest months; ventilation and humidity control usually help. Leak-related staining follows a path, shows tide lines, and appears after rain or after a neighbor uses water; it needs a building repair. Moisture readings and the pattern of staining help tell the difference, which matters when deciding whether to call the managing agent.

For Co-op Boards and Managing Agents

When a shareholder reports mold, boards need to know whether the cause is inside the apartment or part of the building. An independent mold assessment can document conditions in the affected unit and, where authorized, in adjacent units or common areas such as basements, laundry rooms, and storage rooms. Because we never perform remediation, our findings remain independent of any contractor who may do the work, consistent with the New York State requirement that assessment and remediation be performed by separate licensees on regulated projects.

Signs Worth a Professional Look

  • A musty smell in a closet, bathroom, or bedroom
  • Ceiling stains below bathrooms or kitchens upstairs
  • Bubbling paint or damp plaster near windows or radiators
  • Spotting in exterior corners during winter
  • A leak that was not dried quickly

Understanding Air Sampling Results

Indoor samples are compared with an outdoor sample collected at the same time, and spore types matter as much as totals. Interpretation always considers what we observed and measured.

What Your Findings Include

When a written report is part of your service, it lists the areas evaluated and any that could not be accessed, documents observed conditions with photographs, summarizes moisture readings and likely sources, presents laboratory results with interpretation, and recommends practical next steps.

How the Inspection Works

We start with a phone call about your concerns and which areas to include, and we confirm any building requirements, such as advance notice or a certificate of insurance. On site, we inspect, take moisture readings, photograph conditions, and collect samples according to the scope. Samples go to a laboratory, with turnaround based on the service level selected. When a written report is part of your service, it includes laboratory results, interpretation, observed conditions, and recommendations.

Preparing for Your Visit

  • Leave suspect areas uncleaned and unpainted.
  • Keep windows closed as usual before air sampling.
  • Clear access to closets, radiators, windows, and under-sink cabinets.
  • Gather records of leaks, work orders, and notices from management.

Kensington Mold Testing FAQ

Can you inspect one apartment in a co-op building?

Yes. We inspect the areas you can provide access to and note when moisture appears to come from elsewhere.

Do you inspect Victorian homes?

Yes. We inspect homes and rowhouses throughout Kensington.

Do you remove mold?

No. We provide independent inspection and testing only.

Which nearby areas do you serve?

Windsor Terrace, Borough Park, Flatbush, Midwood, Park Slope, and all of Brooklyn.

Related Pages

See our Flatbush, Borough Park, and Brooklyn pages, plus our mold testing and mold inspection services.

Schedule Mold Testing in Kensington, Brooklyn, NY

For an independent mold inspector in Kensington, Brooklyn, NY, contact Prime Environmental NY.

Prime Environmental NY

Phone: (917) 723-2297

Email: primeenvironmentalny@gmail.com

Business Address: 22-20 78th St, East Elmhurst, NY 11370 (inspections by appointment at your property)

Independent Mold Inspection and Testing Only — No Mold Removal or Remediation.